15 Laser Cut Kitchen Organizers: Free SVG and DXF Files for Every Zone
Laser cut kitchen organizers are tab-and-slot plywood boxes and trays for drawers, counters, the sink and the pantry. The 15 files below cover every kitchen zone, from a 7-part upright cutlery caddy to a 13-part sprinkles organizer; each comes in SVG and DXF for 3, 4, 5 and 6 mm plywood and cuts in about 14–29 minutes on a 10 W diode (3 mm).
The kitchen is where a laser pays for itself fastest. Every drawer has a rattling pile of spoons, every cupboard has a bag of tea that tipped over, and every sink has a sponge sitting in a puddle. A laser cut kitchen organizer fixes one of these spots in an evening, and once the first one is in place, you start looking at the next drawer.
We picked 15 kitchen organizer files from the DXF World library, one or two for each zone of the kitchen. All of them are tab-and-slot plywood boxes, and every download has SVG and DXF versions for 3, 4, 5 and 6 mm plywood. Over a hundred more are in the library, sorted into kitchen categories in the menu on the left.
15 kitchen organizers in one table
| Zone | File | Outer size, mm | Compartments | 10 W diode, 3 mm |
|---|---|---|---|---|
| Drawer | Silverware organizer, 5 slots | 360 × 300 × 60 | 5 | about 29 min |
| Counter | Upright cutlery caddy | 240 × 120 × 120 | 3 | about 14 min |
| Table | Napkin caddy with front pockets | 300 × 200 × 90 | 4 | about 19 min |
| Tea and coffee | Tea bag chest | 320 × 220 × 90 | 8 | about 27 min |
| Tea and coffee | Coffee station organizer | 300 × 220 × 100 | 6 | about 23 min |
| Cooking | Four-lane spice jar organizer | 300 × 200 × 90 | 4 | about 20 min |
| Cooking | Oil bottle and shaker caddy | 320 × 220 × 100 | 5 | about 22 min |
| Cooking | Tall oil and vinegar organizer | 280 × 220 × 120 | 4 | about 20 min |
| Sink | Dish brush and sponge caddy | 300 × 200 × 110 | 5 | about 22 min |
| Sink | Sink caddy with tablet slots | 320 × 220 × 100 | 5 | about 21 min |
| Storage | Six-grid ziplock bag box | 300 × 220 × 80 | 6 | about 22 min |
| Storage | Tiered foil and wrap organizer | 300 × 260 × 90 | 4 | about 24 min |
| Pantry | Snack bar organizer | 340 × 240 × 90 | 5 | about 24 min |
| Pantry | Seven-section countertop organizer | 360 × 240 × 100 | 7 | about 28 min |
| Baking | Nine-compartment sprinkles organizer | 270 × 270 × 80 | 9 | about 27 min |
A 40 W CO2 laser cuts them in roughly 6 to 12 minutes each. These are estimates from the cut length, so do one test run before you plan a whole weekend.
Cutlery drawer and table
Silverware Organizer, 5 Long SlotsOuter size (W × D × H) 360 × 300 × 60 mm (14.17 × 11.81 × 2.36 in)Parts 9Est. time, 10 W diode (3 mm) 29 min 11 sEst. time, 40 W CO2 (3 mm) 12 min 10 sSVG · DXF →
Five long slots across a wide drawer, only 60 mm tall so the drawer still closes. Forks, knives, tablespoons, teaspoons and one slot for the odd things like a can opener.
Upright Countertop Cutlery CaddyOuter size (W × D × H) 240 × 120 × 120 mm (9.45 × 4.72 × 4.72 in)Parts 7Est. time, 10 W diode (3 mm) 14 min 01 sEst. time, 40 W CO2 (3 mm) 5 min 51 sSVG · DXF →
Forks, knives, spoons and chopsticks standing upright in three sections, with a tall back and a low front. The fastest file in this list: about 14 minutes on a diode.
Napkin Caddy With Front PocketsOuter size (W × D × H) 300 × 200 × 90 mm (11.81 × 7.87 × 3.54 in)Parts 8Est. time, 10 W diode (3 mm) 19 min 24 sEst. time, 40 W CO2 (3 mm) 8 min 05 sSVG · DXF →
Napkins stand in a full-width back row, and three low pockets in front hold toothpicks, straws and coasters. It lives on the dining table and moves to the terrace in summer.
Pro tip: before you cut a drawer organizer, measure the inside of the drawer, not the front. Subtract at least 5 mm on each side so the tray drops in and comes out without scraping.
Tea and coffee corner
Tea Bag Chest, 8 CompartmentsOuter size (W × D × H) 320 × 220 × 90 mm (12.60 × 8.66 × 3.54 in)Parts 12Est. time, 10 W diode (3 mm) 26 min 43 sEst. time, 40 W CO2 (3 mm) 11 min 08 sSVG · DXF →
Eight compartments in two rows of four: enough for a whole tea collection plus coffee and sugar sticks. Guests pick a tea at a glance.
Coffee Station Organizer, 6 SectionsOuter size (W × D × H) 300 × 220 × 100 mm (11.81 × 8.66 × 3.94 in)Parts 10Est. time, 10 W diode (3 mm) 23 min 19 sEst. time, 40 W CO2 (3 mm) 9 min 43 sSVG · DXF →
Two large bays at the back for tea bags and coffee sachets and four small cells in front for sugar, creamer, honey and wooden stirrers. A complete coffee station in a 300 mm box. More designs are in tea and coffee organizers.
Spices, oil and sauces by the stove
Four-Lane Spice Jar OrganizerOuter size (W × D × H) 300 × 200 × 90 mm (11.81 × 7.87 × 3.54 in)Parts 8Est. time, 10 W diode (3 mm) 19 min 59 sEst. time, 40 W CO2 (3 mm) 8 min 20 sSVG · DXF →
Four full-depth lanes, jars stand one behind another. If you need more spice ideas, our laser cut spice rack roundup compares all ten spice files.
Oil Bottle and Shaker CaddyOuter size (W × D × H) 320 × 220 × 100 mm (12.60 × 8.66 × 3.94 in)Parts 9Est. time, 10 W diode (3 mm) 22 min 00 sEst. time, 40 W CO2 (3 mm) 9 min 10 sSVG · DXF →
One big full-depth bay for four or more bottles and a 2 × 2 grid of small cells for shakers. Oil, vinegar, soy sauce and salt and pepper in one box that you carry to the table.
Tall Oil and Vinegar OrganizerOuter size (W × D × H) 280 × 220 × 120 mm (11.02 × 8.66 × 4.72 in)Parts 8Est. time, 10 W diode (3 mm) 20 min 09 sEst. time, 40 W CO2 (3 mm) 8 min 24 sSVG · DXF →
The tallest condiment box, 120 mm at the back, so tall bottles do not tip over. Bottles at the back, shakers and spice jars in front.
Common mistake: leaving a bottle caddy unfinished. Oil drips leave dark stains on bare plywood that never come out. Two coats of clear varnish before the first bottle goes in save the box.
Around the sink
Dish Brush and Sponge CaddyOuter size (W × D × H) 300 × 200 × 110 mm (11.81 × 7.87 × 4.33 in)Parts 9Est. time, 10 W diode (3 mm) 21 min 38 sEst. time, 40 W CO2 (3 mm) 9 min 01 sSVG · DXF →
A wide bay for cloths, a narrow upright slot for a dish brush and three stepped bays for soap, tablets and sponges. Everything wet gets its own place.
Sink Caddy with 4 Tablet SlotsOuter size (W × D × H) 320 × 220 × 100 mm (12.60 × 8.66 × 3.94 in)Parts 9Est. time, 10 W diode (3 mm) 21 min 26 sEst. time, 40 W CO2 (3 mm) 8 min 56 sSVG · DXF →
Four small front slots for dishwasher tablets and a long back bay for cloths, a sponge and dish soap. Keep it on the counter next to the sink, not in standing water.
Drawers, wraps and the pantry
Six-Grid Ziplock Bag BoxOuter size (W × D × H) 300 × 220 × 80 mm (11.81 × 8.66 × 3.15 in)Parts 10Est. time, 10 W diode (3 mm) 22 min 12 sEst. time, 40 W CO2 (3 mm) 9 min 15 sSVG · DXF →
A 2 × 3 grid of six cells for zip bags, wrap, clips and small gadgets. Ideal for the drawer that collects everything.
Tiered Foil and Wrap OrganizerOuter size (W × D × H) 300 × 260 × 90 mm (11.81 × 10.24 × 3.54 in)Parts 8Est. time, 10 W diode (3 mm) 24 min 05 sEst. time, 40 W CO2 (3 mm) 10 min 02 sSVG · DXF →
Four full-width rows that rise towards the back, for foil, cling film rolls and flat food bags. Every roll is visible, none hides behind another.
Snack Bar Organizer with Stepped RowsOuter size (W × D × H) 340 × 240 × 90 mm (13.39 × 9.45 × 3.54 in)Parts 9Est. time, 10 W diode (3 mm) 24 min 18 sEst. time, 40 W CO2 (3 mm) 10 min 07 sSVG · DXF →
One deep side bay for protein and granola bars and four stepped rows for nuts, dried fruit and crackers. Kids find the snacks themselves, and you see when it is time to restock.
Seven-Section Countertop OrganizerOuter size (W × D × H) 360 × 240 × 100 mm (14.17 × 9.45 × 3.94 in)Parts 11Est. time, 10 W diode (3 mm) 27 min 43 sEst. time, 40 W CO2 (3 mm) 11 min 33 sSVG · DXF →
Three bays at the back and four smaller ones in front, sized for tea bags, napkins, sachets and a row of spice jars. A good "one box for the whole counter".
Baking supplies
Nine-Compartment Sprinkles OrganizerOuter size (W × D × H) 270 × 270 × 80 mm (10.63 × 10.63 × 3.15 in)Parts 13Est. time, 10 W diode (3 mm) 27 min 06 sEst. time, 40 W CO2 (3 mm) 11 min 18 sSVG · DXF →
Nine compartments in three stepped rows for sprinkle jars, baking sachets, measuring spoons, pastry brushes and cupcake liners. The front drops to 36 mm, so the front row is easy to reach. More in baking organizers.
Plywood and finish for kitchen organizers
Every file comes in four thickness versions, and each version fits only its own sheet, because the slots are drawn for it.
| Zone | Suggested thickness | Finish |
|---|---|---|
| Drawers (cutlery, bags) | 3–4 mm | Clear varnish, light sanding |
| Counter (tea, coffee, snacks) | 4 mm | Clear varnish or hard wax oil |
| Stove area (oil, sauces) | 4–5 mm | Two coats of varnish against oil stains |
| Sink | 5–6 mm | Several coats of waterproof varnish; keep out of standing water |
| Pantry shelves | 3–4 mm | Wax or no finish |
Measure your plywood with calipers before you choose a version: real sheets are often a few tenths of a millimetre off. Read laser power for 3 mm plywood for settings and how many passes 6 mm plywood needs for the thicker sink boxes.
From file to finished organizer
- Measure the place where the organizer will stand and pick a file that fits with a little space around it.
- Measure the plywood and download the matching thickness version.
- Cut a test joint from scrap; if it is loose or tight, adjust for kerf.
- Cut all parts in as many runs as your bed needs.
- Sand the edges, assemble the dividers into the base, then add the walls.
- Glue the outer corners for boxes that you lift often.
- Varnish according to the table above and let it dry for a day.
For a box with a lid or a custom size, the finger joint box guide explains the joints.
Next step: open the drawer that annoys you most, measure it, and pick the file for it from this list. One evening, one organizer, and that drawer stops rattling.
Questions and answers
What are the most useful laser cut kitchen organizers?
A cutlery drawer tray, a tea or coffee organizer, a spice rack and a sink caddy solve the most common kitchen messes. Start with the spot that annoys you most every day.
What plywood thickness is best for kitchen organizers?
3–4 mm is enough for drawer trays and counter boxes. Use 5–6 mm for heavy bottles and for boxes near the sink. Always cut the file version that matches your measured sheet.
Can plywood organizers be used near the sink?
Yes, if they are sealed. Apply several coats of waterproof varnish and keep the box out of standing water, or it will swell and stain.
How long does it take to laser cut a kitchen organizer?
The files here take about 14–29 minutes in 3 mm plywood on a 10 W diode and roughly 6–12 minutes on a 40 W CO2, plus sanding, assembly and finishing.
Will these organizers fit my kitchen drawer?
Check the outer size on the file page against the inside of your drawer, leaving at least 5 mm on each side. The cutlery drawer trays in the library are 60–70 mm tall, low enough for most kitchen drawers.