VisualizationZip Bag Organizer SVG, 6 Compartment Kitchen Grid Box Laser Cut File, Bag and Gadget Sorter DXF
A compact kitchen box divided into a two-by-three grid of 6 cells for zip bags, wrap, clips and small gadgets. It is supplied as SVG and DXF with separate files for 3, 4, 5 and 6 mm plywood, measures 300 × 220 × 80 mm (11.81 × 8.66 × 3.15 in) and is cut from 10 pieces. Its sides slope from the 80 mm back to a 40 mm front, all joints are tab and slot, and the file is free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 300 × 220 × 80 mm (11.81 × 8.66 × 3.15 in)
- Parts
- 10
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,068 × 312 mm
- Cut length
- 6.66 m
- Est. time, 10 W diode (3 mm)
- 22 min 12 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 15 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose your thickness file and test-fit a front-row divider in a scrap slot before the full job.
- 02Cut the ten parts, moving the base to its own sheet if the 1068 mm layout does not fit your bed.
- 03Join base, sloped sides and back, insert the cross divider, then the two tall back dividers and the two short front ones, and fit the front.
- 04Sand, oil, and give each of the six cells one job: bags, clips, bands, wrap, funnel, spare bags.
Six even cells
A cross divider partway down the box splits it into a back row and a front row, and each row is divided into three by two short dividers. The back-row dividers are full height at 80 mm, the front ones about 58 mm, matching the slope. Our layout: zip bags, bag clips and rubber bands in the back; two short rolls of cling film, a folding funnel with measuring spoons, and a second size of zip bags in the front. Six cells of similar size make it easy to give every item one home, which is what keeps a kitchen drawer tidy.
Fitting it to your laser
With ten parts and a layout of about 1068 × 312 mm, this box is one of the shorter files in the set, but it is still too long for most diode beds in one go. Move the base to a separate sheet and the rest fits on a second. Cutting the 3 mm file takes about 22 min 12 s on a 10 W diode, about 9 min 15 s on a 40 W CO2 and about 4 min 26 s on a 100 W CO2. Stay with 3 or 4 mm on a diode; 5 and 6 mm are easier on CO2.
Put the shell together first, slot in the cross divider, then add the two tall back dividers and the two shorter front ones. Glue is optional.
Finishing and selling
A light sanding and a coat of hardwax oil are enough. The grid photographs well from above, so use a top-down shot in your listing. Sell it alone, in a pair for upper and lower drawers, or filled with bags and clips as a new-home gift.
Questions about this file
How big is each cell?
Each cell is a little under 100 mm wide; the back cells are about 120 mm deep and the front ones about 100 mm, so folded zip bags, short rolls and clips fit well.
Does the grid work for seasoning packets too?
Yes, the cells hold seasoning sachets or sauce packets just as well, though the layout was planned as a bag and gadget box.
Which thickness looks best?
4 mm gives the grid a solid feel without making the cells cramped. 6 mm walls take a few millimetres out of every cell.
Is glue needed for the grid?
Dry tab-and-slot joints hold it together; a thin line of wood glue along the base makes it permanent and stiffer.
Can I add labels to the cells?
Add an engraving layer to the front panel with words like bags or clips before cutting; the file itself contains only cut lines.
Similar files
