VisualizationOil Bottle Caddy SVG, Condiment Organizer with Spice Shaker Grid Laser Cut File, Sauce Bottle Box DXF
An organizer split into one big full-depth bay for four or more bottles and a 2 × 2 grid of small cells for spice shakers, five compartments in total. The download includes SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box is 320 × 220 × 100 mm (12.6 × 8.66 × 3.94 in), has 9 pieces and a front that slopes down to 60 mm, and is held together by tabs and slots. Free to download.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 320 × 220 × 100 mm (12.60 × 8.66 × 3.94 in)
- Parts
- 9
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,100 × 332 mm
- Cut length
- 6.60 m
- Est. time, 10 W diode (3 mm)
- 22 min 00 s
- Est. time, 40 W CO2 (3 mm)
- 9 min 10 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Pick the file for your plywood thickness and test a single slot so the tabs neither wobble nor need hammering.
- 02Cut the 9 parts and set aside the long divider, the short cross divider and the two small dividers.
- 03Assemble the outer box, fit the long divider to create the bottle bay, then insert the cross divider and the two small dividers on the shaker side.
- 04Sand, seal with oil or lacquer, and fill the left bay with bottles and the four right cells with shakers.
One big bay, four small cells
Instead of equal rows, this caddy is split by one full-depth divider. The left part is a single open bay running from front to back, wide enough for a cluster of bottles: the photo shows olive oil, balsamic vinegar, a tall ketchup and a hot sauce standing together. Bottles of different heights all fit because nothing crosses this bay.
The right part is divided into four cells by a short cross divider and two small dividers. These cells fit standard glass spice shakers, one or two per cell: peppercorns and herbs at the back, salt and another herb blend in front. The back cells are the full 100 mm height, the front ones sit behind the 60 mm front wall.
Before you cut
The 9 parts are front, back, two sides, base, the long divider, a short cross divider and two small dividers of different heights. The 3 mm layout is 1100 × 332 mm. If your bed is around 400 mm, you can still cut everything by moving the base and the back to a second run.
Cutting time for the 3 mm file is about 22 min 00 s on a 10 W diode, about 9 min 10 s on a 40 W CO2 and about 4 min 24 s on a 100 W CO2. Plywood of 5 and 6 mm is a multi-pass job on a diode.
Selling and gifting
The mixed layout photographs well with real bottles in it, which helps listings stand out. Offer it in natural birch and a dark-stained version, or bundle it with a set of refillable shakers for a cooking-lover gift.
Questions about this file
How many bottles fit in the large bay?
The bay is roughly 160 mm wide and runs the full depth, so four standard round bottles fit, as in the photo, or five slim ones.
Can I swap the bottle bay to the right side?
Yes, just turn the box around during assembly or mirror the dividers; the parts are symmetrical enough to build either way.
Which thickness should I choose?
Choose 4 mm for everyday use, 5 or 6 mm for a heavier, sturdier caddy, and 3 mm if you need the fastest cut.
Do the small dividers need glue?
No, they lock between the cross divider and the walls. A dot of glue only helps if you plan to lift the box by the dividers.
Will it work as a coffee station instead?
Yes, the big bay takes syrup bottles and the four cells hold sugar, stirrers and capsules.
Similar files
