Laser Cut Tea Box Files: 12 Free Tea and Coffee Organizers in SVG and DXF
A laser cut tea box is a plywood box with sections for tea bags, coffee sachets and sugar sticks, joined with tabs and slots. The 12 free files below range from a 7-part, 240 × 160 × 80 mm open tray to a 15-part tiered rack 210 mm tall, including boxes with sliding, pin-hinged and lift-off lids. Each comes in SVG and DXF for 3, 4, 5 and 6 mm plywood and cuts in about 14 to 34 minutes on a 10 W diode (3 mm).
You open the cupboard for a chamomile and get an avalanche instead: green tea envelopes, three kinds of mint, a lonely Earl Grey from last winter, and a coffee stick that has been hiding behind them since spring. A laser cut tea box ends that in one evening of cutting. The bags stand on edge in their own sections, the tags face up, and the corner by the kettle finally looks like somebody planned it.
Below are 12 tea box and coffee organizer files from the DXF World library, chosen to cover every box style we have: open sloped trays, long lane holders, grid boxes, three kinds of lids and two tiered stands. Each download has SVG and DXF files drawn separately for 3, 4, 5 and 6 mm plywood, every part joins with tabs and slots, and the whole set of 18 is in the tea and coffee organizers category.
Laser cut tea box files compared
| File | Type | Outer size, mm (W × D × H) | Parts | 10 W diode, 3 mm |
|---|---|---|---|---|
| Sloped tea bag tray, 3 sections | Open, sloped front | 240 × 160 × 80 | 7 | 14 min 40 s |
| Small 3-slot tea and coffee box | Open, sloped front | 240 × 180 × 90 | 7 | 15 min 35 s |
| Tea bag organizer, 6 sections | Open grid, 2 rows | 280 × 200 × 80 | 10 | 21 min 18 s |
| Tea bag chest, 8 compartments | Open grid, 2 rows | 320 × 220 × 90 | 12 | 26 min 43 s |
| Coffee station organizer | Open, big and small cells | 300 × 220 × 100 | 10 | 23 min 19 s |
| Long 5-slot tea bag holder | Open, single row | 360 × 120 × 80 | 9 | 18 min 49 s |
| Low 6-lane drawer organizer | Open lanes, 70 mm tall | 300 × 240 × 70 | 10 | 27 min 1 s |
| Sliding lid tea box | Sliding lid on rails | 280 × 160 × 80 | 10 | 23 min 50 s |
| Hinged lid tea chest | Lid on plywood pins | 240 × 180 × 80 | 8 | 20 min 42 s |
| Tea box with lift-off lid | Lift-off lid | 260 × 160 × 80 | 8 | 25 min 16 s |
| Three-step tea stand, 6 pockets | Tiered stand | 260 × 200 × 180 | 12 | 28 min 30 s |
| Nine-slot tiered tea rack | Tiered stand | 290 × 200 × 210 | 15 | 33 min 39 s |
The times are estimates for the 3 mm file, worked out from the cut length. On a 40 W CO2 the same boxes take roughly 6 to 15 minutes. Your own speed, power and number of passes will move these numbers, so use them to plan an evening, not as a promise.
Tea boxes with a lid
A lid keeps dust and kitchen steam off the tea, and it turns a box into something you can wrap and give away. The library closes a box in three different ways, and each one cuts and behaves a little differently.
Sliding Lid Tea Box, 3 SectionsOuter size (W × D × H) 280 × 160 × 80 mm (11.02 × 6.30 × 3.15 in)Parts 10Est. time, 10 W diode (3 mm) 23 min 50 sEst. time, 40 W CO2 (3 mm) 9 min 56 sSVG · DXF →
The lid slides in along two rails, and three sections inside sit side by side for tea bags and small tins. It looks the most finished of the set and rewards ten minutes with sandpaper on the lid edges.
Hinged Lid Tea Chest, 3 SectionsOuter size (W × D × H) 240 × 180 × 80 mm (9.45 × 7.09 × 3.15 in)Parts 8Est. time, 10 W diode (3 mm) 20 min 42 sEst. time, 40 W CO2 (3 mm) 8 min 37 sSVG · DXF →
This lid pivots at the back on pins cut into the plywood itself, so there is no metal hinge to buy and nothing to screw in. At 240 × 180 × 80 mm it is the smallest lidded tea box here.
Tea Box With Lift-Off LidOuter size (W × D × H) 260 × 160 × 80 mm (10.24 × 6.30 × 3.15 in)Parts 8Est. time, 10 W diode (3 mm) 25 min 16 sEst. time, 40 W CO2 (3 mm) 10 min 32 sSVG · DXF →
The easiest lid to get right: a separate top that lifts off and sits back on. If you have never fitted a moving lid before, start here, then move on to the rails or the pins.
| Lid style | How it opens | Parts | What to watch |
|---|---|---|---|
| Sliding lid | Slides along two rails | 10 | The lid must run freely; dry-fit it before any glue and sand the edges if it binds |
| Pin hinge | Flips up at the back on plywood pins | 8 | Keep glue away from the pins; leave room behind the box for the lid to tip back |
| Lift-off lid | Separate top that sits on the box | 8 | Most forgiving fit; on a busy counter the lid can wander off |
Pro tip: for the lidded boxes, cut the version that matches the plywood you measured, not the number printed on the sheet. A lid that sits 0.3 mm too tight in its rails is the difference between a nice gift and a box you open with a butter knife. If a lid binds or rattles, the cause is almost always kerf: how to measure kerf shows a quick test on scrap.
Open tea bag trays for the counter
Open trays are faster to cut and quicker to use: no lid, a low front, and the bags standing in rows where you can see them.
Sloped Tea Bag Tray, 3 SectionsOuter size (W × D × H) 240 × 160 × 80 mm (9.45 × 6.30 × 3.15 in)Parts 7Est. time, 10 W diode (3 mm) 14 min 40 sEst. time, 40 W CO2 (3 mm) 6 min 07 sSVG · DXF →
Seven parts and 14 min 40 s on a 10 W diode make this the quickest tea file in the list. Three sections behind a low front: black, green and herbal, done.
Small 3-Slot Tea and Coffee BoxOuter size (W × D × H) 240 × 180 × 90 mm (9.45 × 7.09 × 3.54 in)Parts 7Est. time, 10 W diode (3 mm) 15 min 35 sEst. time, 40 W CO2 (3 mm) 6 min 30 sSVG · DXF →
The same idea in a slightly deeper 240 × 180 × 90 mm body. Two long dividers make three compartments, enough for tea bags, instant coffee and sugar sticks next to the kettle.
Tea Bag Organizer, 6 SectionsOuter size (W × D × H) 280 × 200 × 80 mm (11.02 × 7.87 × 3.15 in)Parts 10Est. time, 10 W diode (3 mm) 21 min 18 sEst. time, 40 W CO2 (3 mm) 8 min 53 sSVG · DXF →
Two even rows of three. The sides drop from 80 mm at the back to 48 mm at the front, so the front row is easy to reach and the back row still stays in view.
Tea Bag Chest, 8 CompartmentsOuter size (W × D × H) 320 × 220 × 90 mm (12.60 × 8.66 × 3.54 in)Parts 12Est. time, 10 W diode (3 mm) 26 min 43 sEst. time, 40 W CO2 (3 mm) 11 min 08 sSVG · DXF →
The one for real tea collectors: eight compartments in two rows of four and 12 parts. A whole shelf of tea fits, with room left for coffee and sugar.
Common mistake: sizing the box for the tea you happen to have today. Envelope widths differ from brand to brand, and the box will outlive this month's shopping. Measure your widest envelope, then divide the inside width of the box by the number of sections (minus the dividers) before you choose a file.
Coffee stations, shelves and drawers
Not every tea corner is a free stretch of counter. These three are shaped for a coffee machine, a narrow shelf and a drawer.
Coffee Station Organizer, 6 SectionsOuter size (W × D × H) 300 × 220 × 100 mm (11.81 × 8.66 × 3.94 in)Parts 10Est. time, 10 W diode (3 mm) 23 min 19 sEst. time, 40 W CO2 (3 mm) 9 min 43 sSVG · DXF →
Two large back bays for tea bags and coffee sachets, four small front cells for sugar sticks, creamer, honey and stirrers. Put it next to the coffee machine and everything for a cup is within one reach.
Long 5-Slot Tea Bag HolderOuter size (W × D × H) 360 × 120 × 80 mm (14.17 × 4.72 × 3.15 in)Parts 9Est. time, 10 W diode (3 mm) 18 min 49 sEst. time, 40 W CO2 (3 mm) 7 min 50 sSVG · DXF →
Only 120 mm deep and 360 mm long, with five slots in one row: made for a windowsill, a narrow shelf or the gap behind the kettle. Its layout is about 1344 mm long, the longest of the set, so on a desktop bed plan several runs.
Low 6-Lane Tea Bag Drawer OrganizerOuter size (W × D × H) 300 × 240 × 70 mm (11.81 × 9.45 × 2.76 in)Parts 10Est. time, 10 W diode (3 mm) 27 min 01 sEst. time, 40 W CO2 (3 mm) 11 min 15 sSVG · DXF →
Just 70 mm tall, so it slides into a kitchen drawer. Six lanes run from front to back, and the bags stand in them like index cards you flip through.
Tiered tea stands
Steps lift the back rows, so nothing hides behind a taller box. Both stands come with small engraved part numbers, which helps more than you would expect at assembly time.
Three-Step Tea Stand, 6 PocketsOuter size (W × D × H) 260 × 200 × 180 mm (10.24 × 7.87 × 7.09 in)Parts 12Est. time, 10 W diode (3 mm) 28 min 30 sEst. time, 40 W CO2 (3 mm) 11 min 52 sSVG · DXF →
Three steps, each split into two pockets, six in total, for tea bags and loose-leaf jars. At 180 mm tall it suits a home counter or a small office kitchen.
Nine-Slot Tiered Tea RackOuter size (W × D × H) 290 × 200 × 210 mm (11.42 × 7.87 × 8.27 in)Parts 15Est. time, 10 W diode (3 mm) 33 min 39 sEst. time, 40 W CO2 (3 mm) 14 min 01 sSVG · DXF →
The biggest tea file: three steps with two dividers each make nine slots, the stand is 210 mm tall, and its 15 parts take 33 min 39 s on a 10 W diode. It looks just as at home on a café counter as in a kitchen.
How to cut and finish a tea box
- Measure your plywood with calipers in a few places and download the version closest to that number.
- Cut one tab and one slot from scrap. If the joint is loose or too tight, read what kerf is and adjust before the real cut.
- The layouts here are about 820 to 1344 mm long. On a 300 × 300 or 400 × 400 mm bed, move the parts into several runs, and check your working area against standard laser bed sizes.
- Dry-fit the whole box before glue. Fit the lid last.
- Sand the soot off the edges, then finish.
Tea bags sit in their own paper envelopes, so the wood does not touch the tea. A kitchen still means steam and wet hands, though, and two thin coats of a clear finish keep the box clean for years. If you want to keep loose leaf straight in a section, read what makes laser cut wood food safe first, or simply put the leaf in a tin inside the box.
Pro tip: a lidded tea box with a name engraved on the lid is one of the easiest gifts a laser can make. Add the text in your laser software before you cut. More ideas are in personalized laser gift ideas.
Next step: count your teas, pick a box with one section more than you need (there is always a new tea), and cut the test joint tonight. Tomorrow morning the kettle corner will be the tidiest spot in the kitchen.
Read next: Sliding Lid Box Laser Cut and Laser Cut Gift Ideas.
Questions and answers
What size should a laser cut tea box be?
Most tea boxes here are 240–320 mm wide and 160–220 mm deep, which fits a counter or a shelf. Measure the spot first and your widest tea envelope, then pick a box with enough section width.
Which plywood thickness is best for a tea box?
3 or 4 mm plywood is plenty for a tea box, which carries very little weight. Use 5–6 mm for the big tiered racks or if you want a heavier, sturdier feel.
Can I make a tea box with a lid without hinges?
Yes. The library has a sliding lid that runs in two rails, a lid that pivots on plywood pins and a lift-off lid, all without metal hardware.
How long does it take to laser cut a tea box?
The 12 files here take about 14 to 34 minutes in 3 mm plywood on a 10 W diode and roughly 6 to 15 minutes on a 40 W CO2, plus assembly and finishing.
Is it safe to store loose tea in a plywood box?
Tea bags in envelopes do not touch the wood. For loose leaf, put it in a tin or jar inside the box, or use a finish sold as food safe and let it cure fully.