VisualizationSpice Storage Box With Lid Laser Cut File, Spice Pouch Box SVG, Two Section Seasoning Box DXF, Pantry Box
A free laser cut file for a spice storage box with a separate lid that lifts off, and two sections inside: a wide one for spice pouches and one for small jars. It measures 260 × 200 × 100 mm (10.24 × 7.87 × 3.94 in) and is cut from 7 plywood pieces that join with tabs and slots. Both SVG and DXF are included, drawn separately for 3, 4, 5 and 6 mm plywood.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 260 × 200 × 100 mm (10.24 × 7.87 × 3.94 in)
- Parts
- 7
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 940 × 312 mm
- Cut length
- 7.85 m
- Est. time, 10 W diode (3 mm)
- 26 min 10 s
- Est. time, 40 W CO2 (3 mm)
- 10 min 54 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Download the SVG or DXF for your plywood and test one tab in a scrap slot to be sure the walls will fit tight.
- 02Cut the seven pieces, giving the lid the flattest part of the sheet.
- 03Fit back and sides to the base, slot in the divider, add the front wall, then lay the lid on top to check it sits flat.
- 04Sand the rim and the lid edges, finish with oil or lacquer, and file pouches upright in the wide section with jars beside them.
Pouches first, jars beside them
This box is built around spice pouches. In the photo the larger left section is packed with flat pouches filed upright like cards: paprika, mixed herbs, curry, a green herb blend and a thyme pack at the front. The right section holds six small jars in pairs (dried herbs, peppercorns, turmeric, chili, rosemary and coriander). One full-depth divider separates the two sides, and all walls are 100 mm tall, so even tall pouches stay inside.
The lid is a flat 260 × 200 mm panel that simply rests on top. Lift it off and lean it against the wall while you cook, as in the photo, then put it back to keep dust and light away from the spices. Nothing to hinge or slide makes it the easiest lidded box to build.
Cutting tips
The file has seven pieces: front, back, two sides, base, divider and lid. Cutting time for the 3 mm file is about 26 min 10 s on a 10 W diode, about 10 min 54 s on a 40 W CO2 and about 5 min 14 s on a 100 W CO2. The 3 mm layout is 940 × 312 mm; on a 400 mm bed put the base and lid on separate sheets. Choose a flat sheet for the lid, since a warped lid will rock on the rim. A diode cuts 3 mm in one or two passes; for 5–6 mm plan on several passes or a CO2.
For shops and gifts
Spice sellers can ship a starter kit in it, with their logo engraved on the lid, pouches on the left and sample jars on the right. Filled with homemade blends it also makes a welcome Christmas present.
Questions about this file
Does the lid lock onto the box?
It is a separate flat panel that rests on the walls. It lifts straight off and has no hinge or lock.
What fits in the wide section?
Standard spice pouches up to about 100 mm tall stand upright in it, filed one behind the other like index cards.
Is MDF fine for this pouch box?
Yes, 3 or 4 mm MDF works with the matching file. Seal it well, because raw MDF swells from kitchen steam.
Can the box be made bigger for bulk pouches?
Edit the outline lengths rather than scaling the file, so slots keep the exact thickness of your sheet.
Can I put my logo on it?
The lid is a large flat surface that suits a logo or a label, which you add as an engrave layer of your own before cutting.
Similar files



