Font tester for laser cutting and engraving
Type a name or a phrase and see it in 95 free fonts. Switch to cut view to see the outline the laser will follow and spot thin strokes before you waste a sheet.
Engraving or cutting: choose the font for the job
For engraving, the laser fills the letters on the surface, so almost any font works as long as the text is large enough to read. For cut-out names and signs the laser follows the outline, and the font decides whether the result holds together.
Rules for fonts that cut well
- Stroke width: keep the thinnest part of a letter at least 1–1.5 mm wide in 3 mm plywood, more in MDF. Thin hairlines snap.
- Script fonts: the letters must touch. Weld them into one shape in LightBurn, Inkscape or Illustrator so the word comes out as one piece.
- Closed centres: O, A, B, D, P and R lose their centres when cut. Use a stencil font or draw small bridges.
- Size: the smaller the text, the simpler and bolder the font must be.
The cut view of the tester draws the outline in red like a cut line, which makes thin parts and loose islands easy to spot. More detail in fonts and bridges for laser cut name signs.
About these fonts
All 95 fonts are free fonts from Google Fonts and are served from this site, so nothing is loaded from third-party servers while you test. Use Get font to download a font for your design software. Cyrillic text shows only the fonts that include Cyrillic letters, and Japanese text the fonts made for Japanese.
Questions and answers
What is the best font for laser cut names?
Bold script fonts with connected letters, such as Pacifico, Lobster, Cookie or Damion, cut cleanly in 3 mm plywood. For small sizes choose a thicker font and weld the letters.
How do I make cursive letters come out as one piece?
Overlap the letters slightly, select the whole word and use Weld (LightBurn) or Path > Union (Inkscape). The outline then becomes one closed shape.
Can I use these fonts on products I sell?
These are fonts from Google Fonts, which are published for free use in print and products. Check the font page on Google Fonts if you need the exact terms.
Why are some fonts missing when I type in Ukrainian or Japanese?
Not every font has Cyrillic or Japanese letters. With the option switched on, the tester shows only fonts that can write all of your text, so you never get a mix of fonts in one word.
What size should text be for laser engraving?
Engraved text stays readable from about 2–3 mm letter height on wood with a fine font. For cut-out letters start at about 20 mm height in 3 mm plywood.
More free tools
Price a laser cut piece from sheet cost, machine time, extras and your margin. Shows how many parts fit on a sheet.
Quote generatorMake a clean quote for a customer: items, sizes, extras, discount and tax. Save as PDF or send by WhatsApp or email.
Area price calculatorPrice a sign, panel or engraving by the square metre or square foot: area, price per piece and order total.
DPI converterPixels to centimetres or inches at any DPI, the pixels a design needs, and DPI to line interval for laser engraving.