DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0

Area price calculator (per m² or ft²)

Signs, acrylic panels, engraved plaques and printed boards are often priced by area. Enter the size and your rate and see what to charge.

Units

Calculated in your browser. Nothing you type is sent to our server.

Area per piece2.667 ft²
Price per piece$32.00
Total for 1 pcs$32.00Total area: 2.667 ft²
01

Signs and plaques

Wooden and acrylic signs, door plates and menu boards.

02

Acrylic and panels

Cut-to-size acrylic, backdrops and display panels.

03

Engraving

Large engraved areas where time grows with the surface.

How the price is calculated

  • Area = width × height, converted to square metres (from centimetres) or square feet (from inches).
  • Price per piece = area × your price per unit of area. If you set a minimum price, small pieces are raised to it.
  • Total = price per piece × quantity.

Example: a 60 × 40 cm sign has an area of 0.24 m². At 120 per m² it costs 28.80; ten signs cost 288.00. In inches, a 24 × 16 in sign is 2.67 ft²; at $12 per ft² it costs $32.00.

Why use a minimum price

Pricing by area works for large pieces, but a tiny tag would come out almost free while it still needs setup, focusing and handling. A minimum price per piece keeps small orders worth doing.

When area pricing does not fit

For intricate cuts, the cutting time matters more than the surface: a lace-like ornament costs more than a plain square of the same size. Price those with the laser cutting cost calculator, which uses machine time. To send the price to a customer, use the quote generator.

Questions and answers

How do I convert square centimetres to square metres?

Divide by 10,000. A 50 × 50 cm piece is 2,500 cm², which is 0.25 m².

How many square feet is a 12 × 24 inch sheet?

12 × 24 = 288 square inches, divided by 144 gives 2 square feet.

What is a typical price per square foot for laser engraved signs?

It depends on material and detail. Plain cut acrylic or plywood is priced low; engraved, painted or layered signs much higher. Start from your cost and margin, then compare with local shops.

Can I use the calculator for printing or sublimation?

Yes. Any job priced by area works: banners, stickers, sublimation panels or UV prints.

Why does the total use the minimum price?

When the area price of one piece is below the minimum you set, the minimum is used for that piece, and the total is the minimum times the quantity.

More free tools