VisualizationSmall Hinged Spice Box Laser Cut File, Flip Top Spice Chest SVG, Wooden Spice Jar Box With Lid DXF
A free laser cut file for a small spice box with a lid that flips open at the back on pins cut into the plywood, and two sections inside for jars and seasoning packets. It measures 240 × 220 × 100 mm (9.45 × 8.66 × 3.94 in) and is cut from 7 plywood pieces that fit together with tabs and slots. The free download holds an SVG and a DXF for 3, 4, 5 and 6 mm plywood.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 240 × 220 × 100 mm (9.45 × 8.66 × 3.94 in)
- Parts
- 7
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 940 × 336 mm
- Cut length
- 6.24 m
- Est. time, 10 W diode (3 mm)
- 20 min 48 s
- Est. time, 40 W CO2 (3 mm)
- 8 min 40 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Get the version for your plywood thickness and dry-fit one lid pin in a scrap hole to confirm it turns without play.
- 02Cut the seven pieces and keep the two tall side panels together, since they carry the lid.
- 03Assemble base, back, front and divider, set the lid pins into the side panels as you add the second side, then check the lid swings fully open.
- 04Sand the lid edges for an easy swing, oil the box but keep oil out of the pivot holes, and load jars left and packets right.
Compact chest with a flip lid
At 24 cm wide this is the narrowest lidded box in the spice range, small enough for a corner of the counter or a shelf above the stove. The side panels rise a little above the walls (104.2 mm) to carry the lid, which pivots at the back on two plywood pins. No metal parts are needed; lift the front edge and the lid swings up and leans back.
Inside, one divider runs front to back. In the photo the left section holds six small jars with gold lids, two per row, filled with peppercorns, turmeric, chili and herb mixes. The right section takes seasoning packets standing in rows: green herb blends at the back, red paprika packs in the middle, yellow curry mixes at the front. With the lid closed the spices stay in the dark, which keeps colour and aroma longer.
Making the hinge work
The seven pieces are front, back, two sides, base, divider and lid. Cutting time for the 3 mm file is about 20 min 48 s on a 10 W diode, about 8 min 40 s on a 40 W CO2 and about 4 min 10 s on a 100 W CO2. The 3 mm layout is 940 × 336 mm, so a 400 mm bed needs it split into three sheets. Fit the lid before gluing anything: it must turn freely on its pins. If it rubs, sand the back edge of the lid slightly. Do not let glue or thick finish get into the pivot holes.
Gift ideas
A filled chest is a thoughtful gift for a new cook or a teacher who loves baking. The plain lid takes an engraved monogram, a recipe card motif or a family name, added as your own layer.
Questions about this file
Does the hinged lid need metal hardware?
No. The lid turns on pins cut from the same plywood, so you only need the laser-cut parts.
How many jars and packets fit?
The photo shows six small round jars on the left and three rows of seasoning packets on the right. Bigger jars fit if they are under the 100 mm wall height.
Which thickness makes the strongest hinge?
4 or 5 mm plywood gives sturdier pins for a lid opened every day. 3 mm works but treat the lid gently.
Can I engrave the lid?
Yes, the lid is a flat 240 mm wide panel that suits a name, a monogram or a herb drawing, engraved as an extra layer you add.
Should I glue the box?
Glue the walls and base if you like, but never the lid or its pins, or it will stop opening.
Similar files



