DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood caddy with two compartments on a kitchen counter, three sauce jars in one bay and two oil and vinegar cruets with pour spouts in the other.Visualization
DW-106007 · UPDATED 11/17/2026

Oil and Sauce Caddy SVG, Two Section Condiment Box Laser Cut File, Wooden Olive Oil Bottle Holder DXF

A small open caddy with two bays that keeps oil cruets and sauce jars together beside the stove. The free download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box measures 270 × 200 × 80 mm (10.63 × 7.87 × 3.15 in), has straight 80 mm walls and is cut from just 6 pieces that lock together with tabs and slots.

Author
DXF World · 335 files
Formats
SVG, DXF
Outer size (W × D × H)
270 × 200 × 80 mm (10.63 × 7.87 × 3.15 in)
Parts
6
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
960 × 292 mm
Cut length
4.38 m
Est. time, 10 W diode (3 mm)
14 min 36 s
Est. time, 40 W CO2 (3 mm)
6 min 05 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Pick the SVG or DXF that matches your plywood thickness and cut one corner joint from scrap to check the fit.
  2. 02Cut the six pieces; split the 960 mm layout over two sheets if your laser bed is shorter.
  3. 03Seat the back and the two sides in the base, push the divider into its slots, then add the front wall last.
  4. 04Sand the edges, oil the inside with a food-safe finish and stand your cruets and sauce jars in the two bays.

Two bays, one divider

This is the simplest caddy in the condiment set: four walls, a base and a single divider that runs from the back wall to the front. All walls stand the full 80 mm, so tall pourer bottles lean against wood rather than tipping over the rim. In the photo one bay carries three short jars (a red chili sauce, a dark soy-style sauce and a creamy dressing) and the other holds a pair of glass cruets with steel spouts, olive oil next to red wine vinegar.

The 200 mm depth lets a bottle and a jar stand one behind the other, and at 270 mm long the box fits on a narrow strip of counter or inside a deep drawer.

Cutting six pieces

The layout for every thickness is 960 × 292 mm. If your bed is shorter, move the base onto one sheet and the four walls plus the divider onto a second. On a 10 W diode the 3 mm file takes about 14 min 36 s and usually goes through in one or two passes; a 40 W CO2 finishes in about 6 min 05 s. For 5 or 6 mm stock a diode needs extra passes, so a CO2 is the easier choice there.

Press the back and both sides into the base, slide the divider into its slots, and close the box with the front wall. The joints hold dry. Add wood glue only when you want it fixed for good.

Small batches, quick gifts

With only six parts this caddy is quick to repeat. Cut a few, fill each with a bottle of local oil and a jar of homemade sauce, and you have a ready gift for a housewarming or a farm market table. Wipe the inside with food-safe oil first so a drip from a cruet spout does not leave a dark ring.

Questions about this file

Will tall olive oil cruets stay upright in it?

Yes. Every wall is 80 mm high, which supports the lower third of a typical 250 ml cruet, so the bottles lean on wood instead of falling outward.

Can I move the divider to make one bay larger?

The divider slots are cut in fixed places, so moving it means editing the slot positions in the SVG or DXF. Keep the slot width equal to your plywood thickness when you do.

What happens if I scale the file up to fit bigger bottles?

The outer size grows but the slots grow too, so they no longer match your sheet. Scale the drawing, then reset every slot and tab to the real plywood thickness before cutting.

Does it need glue?

No, six pieces lock together firmly enough to carry full bottles. A thin line of wood glue in each joint is worth it if the caddy will be moved around a lot.

How do I keep oil from soaking into the base?

Seal the inside with a food-safe oil or a clear lacquer before use, and put a small cork mat under the cruets so drips stay off the wood.

Similar files