DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood sloped condiment caddy with one wide bay holding three oil and vinegar bottles and a right column of three small sauce and spice jars, on a white marble counter with a lemon behindVisualization
DW-106006 · UPDATED 11/17/2026

Oil Bottle Caddy SVG, Compact Condiment Organizer Laser Cut File, Sauce Jar and Vinegar Holder DXF

A compact sloped condiment caddy with one wide bay for tall oil and vinegar bottles and a narrow column on the right split into three jar slots. The free download contains SVG and DXF files for 3, 4, 5 and 6 mm plywood; the caddy is 240 × 200 × 100 mm (9.45 × 7.87 × 3.94 in), made of 8 pieces with tabs and slots, and slopes from 100 mm at the back to a 60 mm front.

Author
DXF World · 335 files
Formats
SVG, DXF
Outer size (W × D × H)
240 × 200 × 100 mm (9.45 × 7.87 × 3.94 in)
Parts
8
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
900 × 312 mm
Cut length
5.21 m
Est. time, 10 W diode (3 mm)
17 min 21 s
Est. time, 40 W CO2 (3 mm)
7 min 14 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Open the file for your plywood thickness and cut the long divider first to check how its tabs seat in the base.
  2. 02Cut the eight pieces from the 900 × 312 mm layout, in one go on a large bed or split over two sheets on a smaller one.
  3. 03Assemble base, back, sloped sides and front, add the long divider, then fit the 73.6 mm cross divider at the front and the 85.8 mm one behind it.
  4. 04Sand and seal the caddy, then stand tall bottles in the left bay and three jars in the right column.

One wide bay, three small slots

The box is only 240 mm long, so it fits a corner of the counter or a deep shelf next to the stove. A full-depth divider splits it into two parts. On the left is one open bay for tall bottles; in the photo it holds a balsamic vinegar, an olive oil and a round cork-stoppered bottle side by side. On the right, two cross dividers turn a narrow column into three small slots for jars: chilli sauce, a spice blend and a creamy garlic sauce.

The two cross dividers are not the same height. One is 73.6 mm tall and the other 85.8 mm, so the jar slots step up toward the back and follow the slope of the sides. Every jar lid stays in view.

Cutting the eight pieces

The layout is 900 × 312 mm. A large-format CO2 takes it in one go; on a 400 mm bed, split it over two or three sheets. Cutting runs about 17 min 21 s for the 3 mm file on a 10 W diode, about 7 min 14 s on a 40 W CO2 and about 3 min 28 s on a 100 W CO2. The 5 and 6 mm files are worth a look here, because the caddy carries heavy glass in a small footprint; use a CO2 or several diode passes for those.

Put the base, back and sloped sides together, add the 60 mm front, then slide in the long divider. The shorter cross divider goes nearer the front, the taller one behind it. Glue is optional; a few drops at the base corners stiffen the box.

Finishing and gifts

Round over the sloped edges with fine sandpaper and seal everything with food-safe oil or clear lacquer. Paired with a bottle of good olive oil and two homemade sauces, it makes a welcome hostess gift, and as a small, quick item it is easy to stock for weekend markets.

Questions about this file

What bottles fit the wide bay?

The left bay runs the full depth of the caddy, so three slim oil or vinegar bottles stand in it side by side, as in the photo.

Why is one jar divider taller than the other?

They follow the sloping sides, so each jar slot sits a little taller toward the back and the jar lids stay visible.

Can I resize the caddy?

Only if you also redraw the slots to your material thickness; otherwise the tabs will not fit. Keeping it at 100% and choosing the matching thickness file is the simple route.

Can it live beside the sink?

Seal it first with two coats of lacquer or a hard-wax oil, because raw plywood darkens and swells where water sits.

Can I add a name or a motif?

Yes. The file has cut lines only, but the 240 mm front is a good spot for an engraved name or a small herb motif that you add yourself.

Similar files