DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Birch plywood box with two sections holding embossed white napkins, cork coasters, glass and steel straws and toothpicks, its lift-off lid leaning behind on a wooden kitchen counterVisualization
DW-105047 · UPDATED 11/17/2026

Napkin Box With Lid SVG, Two Section Wooden Storage Box Laser Cut File, Straw and Napkin Bin DXF

A free napkin box with a separate lid that lifts off and sits on top, and one divider that splits the inside into two sections left to right, for napkins and coasters on one side and straws and toothpicks on the other. The download comes with SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box is 290 × 200 × 80 mm (11.42 × 7.87 × 3.15 in) and is cut as 7 pieces that join with tabs and slots.

Author
DXF World · 335 files
Formats
SVG, DXF
Outer size (W × D × H)
290 × 200 × 80 mm (11.42 × 7.87 × 3.15 in)
Parts
7
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,000 × 292 mm
Cut length
7.83 m
Est. time, 10 W diode (3 mm)
26 min 05 s
Est. time, 40 W CO2 (3 mm)
10 min 52 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Pick the file for 3, 4, 5 or 6 mm plywood and cut a test slot to confirm how tight the joints are.
  2. 02Cut the 7 pieces, running the walls as one job and the base, divider and lid as a second if your bed is small.
  3. 03Join the front, back and two sides around the base, then push the divider in to form the two sections.
  4. 04Sand and oil the box and the lid separately, fill both sections and set the lid on top.

Simple box, big sections

With only one divider, this box has two generous sections instead of a grid of small cells. The photo gives the larger left section to a stack of white embossed napkins with cork coasters lying in front of them, and the narrower right section to glass and steel straws and a small jar of toothpicks. Because the box is 200 mm deep, folded paper napkins fit flat or on edge. The lid is a flat 290 × 200 mm panel that rests on top of the walls and keeps dust and crumbs off when the box sits on an open shelf.

Seven pieces, one evening

For the 3 mm file the cutting time is about 26 min 05 s on a 10 W diode, about 10 min 52 s on a 40 W CO2 and about 5 min 13 s on a 100 W CO2. The 3 mm layout measures 1000 × 292 mm, so a bed of around 500 × 300 mm handles it in two jobs: the walls in one, the base, divider and lid in the other. A diode laser manages 3 and 4 mm comfortably; 6 mm gives a heavier storage box but should go to a CO2 machine or many slower passes.

Building and finishing

Fit the four walls to the base, then drop the divider in. The joints are snug enough to hold dry, though wood glue makes the walls permanent. Leave the lid loose, since it only rests on top. Ease the edges with fine sandpaper, then apply a food-safe oil so the box can live by the dining table.

For gifts, fill it with linen napkins and napkin rings for a host, glue a pressed flower or engrave your own initials on the lid for a wedding table, or sell it as a picnic set with reusable straws.

Questions about this file

Does the lid lock or click on?

No, it is a plain lift-off lid that rests on the walls. It keeps dust out but will slide off if the box is tipped.

Can the divider sit somewhere else?

Yes, move its slots in your editor before cutting. Keep the slot width equal to your plywood thickness so it still holds.

Will 3 mm plywood be strong enough?

For napkins, straws and coasters, 3 mm is plenty. Choose 5 mm if the box will hold heavy items or be carried around full.

Can I cut it in acrylic for a modern kitchen?

Yes, on a CO2 laser; bond the joints with acrylic cement and use the file that matches the acrylic thickness.

What else could the two sections store?

Tea bags and sugar sticks, cutlery rolls for a picnic, or craft supplies such as ribbons on one side and scissors on the other.

Similar files