DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Long light birch plywood caddy with six pockets in two rows on a kitchen counter: cork coasters and toothpicks in the low front row, paper straws, metal straws and napkins in the taller back row.Visualization
DW-105074 · UPDATED 11/19/2026

Six Pocket Table Caddy SVG, Napkin and Straw Organizer Laser Cut File, Two Tier Coaster Holder DXF

A free laser cut table caddy with six pockets in two rows: three low pockets at the front and three taller ones behind, 350 × 180 × 80 mm (13.78 × 7.09 × 3.15 in) overall. It is made of 8 pieces joined with tabs and slots, and the download contains SVG and DXF files for 3, 4, 5 and 6 mm plywood.

Author
DXF World · 368 files
Formats
SVG, DXF
Outer size (W × D × H)
350 × 180 × 80 mm (13.78 × 7.09 × 3.15 in)
Parts
8
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,080 × 272 mm
Cut length
6.75 m
Est. time, 10 W diode (3 mm)
22 min 30 s
Est. time, 40 W CO2 (3 mm)
9 min 23 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Pick the file for your plywood thickness and confirm the fit with one test slot.
  2. 02Cut the 8 pieces: low front, back, two ends, base, the long cross divider and two short dividers.
  3. 03Fix the back and ends to the base, add the low front, set the long cross divider in, then drop the two short dividers over it.
  4. 04Sand and lacquer the caddy, then stand straws and napkins at the back and lay coasters and picks in front.

Two rows, two heights

A single cross divider runs the full 350 mm length and splits the caddy into a front and a back row. Two short dividers then cut both rows into three, giving six pockets. The front wall is only 48 mm tall, so the front row is shallow and its contents sit low; the back wall and the cross divider rise to 80 mm and hold taller things upright. In the photo the front row has round cork coasters, a glass of toothpicks and square cork coasters, while the back row stands paper straws, metal straws and a block of napkins. Everything is visible from the front, which helps on a self-serve counter.

Making it

The file has eight parts: front, back, two ends, base, the long cross divider and two short dividers. For the 3 mm file allow about 22 min 30 s on a 10 W diode, about 9 min 23 s on a 40 W CO2 and about 4 min 30 s on a 100 W CO2. The 3 mm layout is 1080 × 272 mm, longer than a typical desktop bed, so place the base and cross divider on one sheet and the rest on another. Put the cross divider in before the two short dividers, since they slot over it.

Who buys this

Coffee shops, bakeries and food stalls need a place for straws, stirrers, napkins and lids that customers can reach without asking. A long, low caddy like this fits beside the till. For home use it suits a drinks trolley or a patio table. Seal it with lacquer so sticky fingers wipe off, and offer a logo on the front wall as an upgrade when you sell to businesses.

Questions about this file

Why do the front pockets sit lower than the back ones?

The front wall is 48 mm against 80 mm at the back, so short items like coasters and pick jars stay in view while straws and napkins stand behind them.

Can I change the pocket sizes?

Moving the short dividers means editing their slots in the walls and the cross divider; it is easier to keep the layout and change what goes in each pocket.

Will paper straws fit upright?

Standard drinking straws stand in the back row and lean against the back wall, as in the photo.

Which thickness suits a busy cafe?

Choose 5 or 6 mm plywood for daily handling; 3 mm is fine for home and gifts.

Will the six-pocket caddy work in clear acrylic?

Yes, use the 3 mm file with 3 mm acrylic on a CO2 laser and join it with acrylic cement.

Similar files