VisualizationTiered Napkin Display Stand SVG, Three Step Coaster Rack Laser Cut File, Wooden Shop Display Organizer DXF
This free file cuts a three-tier napkin and coaster rack with four pockets on every step, 12 in total, measuring 290 × 240 × 180 mm (11.42 × 9.45 × 7.09 in). It is built from 18 plywood pieces that join with tabs and slots, small part numbers are engraved to guide assembly, and SVG and DXF files are included for 3, 4, 5 and 6 mm plywood.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 290 × 240 × 180 mm (11.42 × 9.45 × 7.09 in)
- Parts
- 18
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,180 × 328 mm
- Cut length
- 11.39 m
- Est. time, 10 W diode (3 mm)
- 37 min 58 s
- Est. time, 40 W CO2 (3 mm)
- 15 min 49 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for your plywood thickness and cut one slot on scrap to test the tab fit.
- 02Cut all 18 numbered pieces and sort the nine dividers by size before you start.
- 03Fit the shelves, step boards, front board and brace into one side, close with the second side, then press three dividers into each step.
- 04Sand the step edges, apply lacquer, and arrange napkins, coasters, picks and straws across the twelve pockets.
Three steps, four pockets each
The stand rises in three steps from front to back, each step a shelf with a low board in front and three short dividers that make four pockets. The back step stands highest, so nothing hides behind anything else. In the photo the top row shows four napkin designs side by side, the middle row four kinds of coasters, and the bottom row two jars of toothpicks with silver and gold straws. That makes it a natural display for a shop selling napkins and coasters, or a party table where guests pick their own.
Pieces and cutting time
Eighteen parts: two stepped sides, a front board, two step boards, three shelves, a brace and nine dividers. The dividers come in two sizes, three of one size and six of a slightly smaller one, and the engraved numbers keep them apart. The 3 mm file needs about 37 min 58 s on a 10 W diode, about 15 min 49 s on a 40 W CO2 and about 7 min 36 s on a 100 W CO2. Its 3 mm layout is 1180 × 328 mm, so on a small bed split it into three jobs: sides, then shelves and boards, then the brace and dividers. Assemble one side flat, add the shelves, boards and brace, close with the second side, then push the dividers in.
Selling and display ideas
Craft stalls use stands like this to show twelve designs of coasters or napkin packs at once. Cafes can keep sugar, stirrers and napkins on it at the coffee station. At home it organizes a party table or a sewing shelf. Finish with lacquer for frequent handling and add your shop logo to the front board.
Questions about this file
What are the engraved numbers for?
Each piece carries a small part number so you can match shelves, boards and the two divider sizes to the right place. That is the only engraving in the file.
Can it hold napkin packs for sale?
Yes, the pockets suit folded napkin packs and coaster sets standing on edge, which is how shops present them.
Is 3 mm plywood strong enough for a stand this size?
It holds napkins and coasters well. For heavier jars or a market stall, cut the 5 or 6 mm version.
Can I scale it larger for bigger items?
You can, but the slots must stay at your material thickness after scaling, so adjust them by hand.
Should I glue it?
The structure holds by friction, but glue on the shelf joints makes it rigid enough to carry around a fair.
Similar files



