DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood tea organizer with eleven compartments in three rising rows: colourful tea bags in front and six tins of loose tea behind, on a grey kitchen counter.Visualization
DW-102009 · UPDATED 11/21/2026

11 Compartment Tea Organizer SVG, Tiered Tea Bag and Tin Box Laser Cut File, Three Row Tea Storage DXF

A free tea organizer laser cut file in SVG and DXF, with separate versions for 3, 4, 5 and 6 mm plywood. It measures 330 × 200 × 100 mm (12.99 × 7.87 × 3.94 in) and holds 11 compartments in three rows that step up toward the back: five narrow slots for tea bags in front, then two rows of three bays for tins. The open box is cut as 15 pieces that join with tabs and slots, and its front wall is half the height of the back, with the sides sloping down to it.

Author
DXF World · 530 files
Formats
SVG, DXF
Outer size (W × D × H)
330 × 200 × 100 mm (12.99 × 7.87 × 3.94 in)
Parts
15
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,080 × 416 mm
Cut length
9.55 m
Est. time, 10 W diode (3 mm)
31 min 50 s
Est. time, 40 W CO2 (3 mm)
13 min 16 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Pick the SVG or DXF that matches your plywood, then cut a single slot and tab on scrap to check the fit.
  2. 02Cut all 15 parts, splitting the 1080 mm layout over two sheets if your bed is shorter.
  3. 03Build the base, sloped sides, front and back, then slot in the two long cross dividers and finish with the eight short ones.
  4. 04Sand the top edges, seal with oil or lacquer, and load tea bags in front and tins in the two rear rows.

Three rows, each a little higher

The front wall stands only 50 mm tall, the back wall 100 mm, and the side panels slope between them, so every row stays visible from the front. Two full-length cross dividers split the floor into three rows, and each one is taller than the row before it. Four short dividers cut the front row into five slots: in the photo they hold pink, yellow, green, white and blue tea bags standing on edge. The middle and back rows each have three bays for round or square tins of loose leaf tea, one tin per bay.

Cutting 15 pieces

The parts are the front, back, two sloped sides, base, two long cross dividers and eight short dividers. For the 3 mm file a 10 W diode needs about 31 min 50 s, a 40 W CO2 about 13 min 16 s and a 100 W CO2 about 6 min 22 s. The full layout is 1080 × 416 mm; on a smaller bed, put the base and the back on one sheet and the dividers on another. A 10 W diode handles 3 mm in one or two passes, while 5 or 6 mm calls for a stronger tube or several slow passes.

Assemble the base and sloped sides first, add the front and back, then drop in the long cross dividers before the short ones. The joints hold dry, and a little wood glue makes them permanent.

Who it suits

With eleven compartments this is a roomy open sorter for a household that keeps both bagged and loose tea. Offer it on Etsy filled with a tasting assortment, use it on a guesthouse breakfast table, or make one as a housewarming gift with a clear oil finish.

Questions about this file

How big are the 11 compartments?

The five front slots are about 6 cm wide and 8 cm front to back, enough for standard tea bags. The six rear bays are about 10 cm wide and 6 cm deep, so tins up to roughly 6 cm across fit.

Can I scale this tea organizer to fit a drawer?

Yes, but change only the outer size and keep every slot as wide as your plywood, or the tabs will not fit. Do one test corner after resizing.

Does it work in MDF or acrylic?

3 mm MDF cuts cleanly and paints well. Acrylic works with the file that matches the sheet thickness, though it can crack if the joints are forced.

Do the eight short dividers need glue?

They stay put by friction in their slots; glue them only if the organizer will be carried around full.

Can I add the tea names to each row?

Engrave names on the front wall or the cross dividers in your own software before cutting; the file itself contains cut lines only.

Similar files