DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood tea tray with sloped sides, three square glass tea canisters in the back row and green, cream and pink tea bags in the low front row, on a kitchen counter.Visualization
DW-102074 · UPDATED 11/20/2026

Slanted Tea Organizer SVG, Tea Canister and Sachet Tray Laser Cut File, Low Front Tea Caddy DXF

A free slanted tea tray laser cut file in SVG and DXF, with separate files for 3, 4, 5 and 6 mm plywood. It measures 350 × 180 × 80 mm (13.78 × 7.09 × 3.15 in) and has six compartments: three in a low front row and three in a taller back row. The 8 pieces join with tabs and slots, and the 48 mm front wall with sloped sides keeps every bag and canister easy to reach.

Author
DXF World · 415 files
Formats
SVG, DXF
Outer size (W × D × H)
350 × 180 × 80 mm (13.78 × 7.09 × 3.15 in)
Parts
8
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,080 × 272 mm
Cut length
6.62 m
Est. time, 10 W diode (3 mm)
22 min 04 s
Est. time, 40 W CO2 (3 mm)
9 min 12 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the file for your plywood thickness and cut one slot on scrap to make sure a tab presses in with light force.
  2. 02Cut the 8 pieces, rearranging them onto smaller sheets if the 1080 mm layout does not fit your bed.
  3. 03Join the back, sloped sides and low front to the base, then add the two long dividers and the cross divider that separates the rows.
  4. 04Smooth the sloped edges, seal the tray, and put canisters in the back row with tea bags in the front.

Two rows at two heights

The front wall is only 48 mm tall while the back stands at 80 mm, and the side panels slope between them. Two dividers run from front to back and one cross divider separates the rows, so you get three columns of two compartments. In the photo the back row carries three square glass canisters with metal lids holding loose black, green and fruit teas, and the low front row holds tea bags in green, cream and pink, their tops showing over the front edge so you can pick one at a glance. Each column is roughly 11 cm wide.

Cut time and assembly order

The 3 mm file cuts in about 22 min 04 s on a 10 W diode, about 9 min 12 s on a 40 W CO2 and about 4 min 25 s on a 100 W CO2. Its layout measures 1080 × 272 mm, so on a 400 mm hobby bed you will need to split the 8 pieces across three sheets. One or two passes clear 3 mm on a diode; thicker 5 and 6 mm plywood wants a stronger tube or repeated passes.

Start by standing the back and the two sloped sides on the base, add the low front, then slide in the two long dividers and lock them with the cross divider. The tabs grip well dry, and a thin line of glue along the base joins makes the tray solid enough to lift with full jars inside.

Finishing and ideas

Sand the sloped top edges smooth because hands brush them every time a tea bag comes out. A coat of clear lacquer protects the birch from steam beside the kettle. Fill it with three canisters of loose tea and a selection of sachets for a housewarming gift, or offer it at a market stall next to a matching spice tray.

Questions about this file

Why do the tea bags sit lower than the canisters?

The sloped sides drop to a 48 mm front, so tea bags in the front row stick out above the wall and are easy to grab, while taller canisters stand safely in the back row.

What fits in the back compartments?

Each back bay is about 11 cm wide, so one everyday kitchen canister stands in each, as in the photo; taller jars simply rise above the 80 mm back wall.

Can I enlarge the tray for bigger jars?

Scale the outline as needed, then reset every slot to your plywood thickness so the tabs still fit tightly.

Will it survive next to the sink?

Raw plywood absorbs water, so seal all faces with a water-resistant lacquer or hardwax oil and wipe up spills quickly.

Is acrylic an option for this tray?

Clear or tinted acrylic of the same thickness can be cut with the matching file; join it with acrylic cement instead of wood glue.

Similar files