DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood tea organizer with a low front row of cream, green, yellow and red tea bags and four square canisters of loose tea in taller bays behind, on a marble counter.Visualization
DW-102075 · UPDATED 11/21/2026

Split Level Tea Organizer SVG, Tea Tin and Sachet Holder Laser Cut File, Low Front Tea Bag Tray DXF

A free split-level tea organizer laser cut file in SVG and DXF, with separate versions for 3, 4, 5 and 6 mm plywood. It measures 380 × 180 × 90 mm (14.96 × 7.09 × 3.54 in) and has 8 sections: four in a low front row for tea bags and four taller bays behind for tins. The open box is cut as 9 pieces that join with tabs and slots, and its front wall is 54 mm high, with the sides sloping down from the 90 mm back.

Author
DXF World · 530 files
Formats
SVG, DXF
Outer size (W × D × H)
380 × 180 × 90 mm (14.96 × 7.09 × 3.54 in)
Parts
9
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,524 × 282 mm
Cut length
7.94 m
Est. time, 10 W diode (3 mm)
26 min 28 s
Est. time, 40 W CO2 (3 mm)
11 min 02 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the SVG or DXF for your plywood and cut a single slot on scrap to check that the tabs press in firmly.
  2. 02Cut the 9 parts, rearranging the long 1524 mm layout into two or three shorter sheets for a smaller bed.
  3. 03Assemble the base, back, sloped sides and low front, then slot the three dividers and the cross divider into a grid and lower it in.
  4. 04Sand the sloped edges smooth, seal the wood, and stand tins in the tall back bays with tea bags in the low front row.

Low row in front, tall bays behind

Three dividers run the full depth and split the box into four columns, and one long cross divider, lower than the back wall, separates a front row from a back row. The front wall is only 54 mm tall, so tea bags in the front row show their colours and come out with two fingers. In the photo the back bays hold four square canisters of rosehip, green, chamomile and black tea, while the front row carries cream, green, yellow and red tea bags. Because the three dividers reach the top of the back wall, tall canisters stay upright.

Cutting and assembly

The nine parts are the front, back, two sloped sides, base, the cross divider and three dividers. For the 3 mm file allow about 26 min 28 s on a 10 W diode, about 11 min 02 s on a 40 W CO2 and about 5 min 18 s on a 100 W CO2. The layout is long and narrow, 1524 × 282 mm, so on a smaller bed rearrange the parts over two or three sheets. A 10 W diode is fine for 3 mm; save 5 and 6 mm for a CO2 or many slow passes.

Build the outer box on the base first, then slot the three dividers and the cross divider together into a grid and lower it in. Dry joints hold well; glue only the outer corners if the organizer will be moved often.

For a coffee and tea corner

This shape works on a shared office counter or a small cafe station as well as at home: square tins of tea or coffee at the back, sachets, sugar sticks or stirrers at the front. Engrave a logo on the back wall for a branded version, and finish with water-based lacquer.

Questions about this file

What size canisters fit the back bays?

Each column is about 9 cm wide, so square canisters up to that width stand upright behind the cross divider.

Why does the front row sit lower than the tin bays?

The 54 mm front wall and sloping sides let you read the tea bag labels and lift them out without tipping the organizer.

Can I use it for coffee instead of tea?

Yes, the back bays take coffee canisters or pod tins, and the front slots fit sugar sticks and drip coffee bags.

Which plywood thickness should I pick for heavy canisters?

3 mm suits a 10 W diode and keeps the organizer light; 5 mm gives sturdier dividers for glass canisters but needs a more powerful laser.

Can I scale it down to 30 cm long?

You can, as long as the slots stay as wide as your plywood; scaling the whole drawing to 80 percent would also shrink the slots and break the fit.

Similar files