DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood split-level spice tray with six sections: three low front bays with pairs of spice jars and three taller back bays holding kraft pouches and herb sachets, on a kitchen counter by a window.Visualization
DW-101074 · UPDATED 11/19/2026

Spice Tray SVG, Two Level Spice Jar and Sachet Organizer Laser Cut File, Six Compartment Seasoning Box DXF

A free laser cut file for a split-level spice tray with six compartments: three low bays along the front for jars and three taller bays behind them for sachets and pouches. The download includes SVG and DXF for 3, 4, 5 and 6 mm plywood; outer size is 350 × 180 × 80 mm (13.78 × 7.09 × 3.15 in), the 44 mm front lets the sides slope down, and the 8 pieces lock together with tabs and slots.

Author
DXF World · 368 files
Formats
SVG, DXF
Outer size (W × D × H)
350 × 180 × 80 mm (13.78 × 7.09 × 3.15 in)
Parts
8
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,080 × 272 mm
Cut length
6.60 m
Est. time, 10 W diode (3 mm)
21 min 59 s
Est. time, 40 W CO2 (3 mm)
9 min 10 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the SVG or DXF for your plywood, then cut the cross divider and one long divider and check that they slot into each other without force.
  2. 02Cut the remaining pieces over two or three sheets if your machine is shorter than 1080 mm.
  3. 03Build the outer box first: base, tall back, both sloped sides and the low front. Then join the two long dividers with the cross divider and lower that grid into the tray.
  4. 04Sand the angled side edges, seal the tray with lacquer or oil, and load jars at the front and sachets at the back.

Low row in front, tall row behind

A cross divider 61.7 mm high runs the full 350 mm width and splits the tray into two rows. Two long dividers cross it from front to back, so each row has three bays. Because the front wall is only 44 mm and the back 80 mm, the front row is shallow and open, while the back row has higher walls that hold paper pouches upright.

The photo shows it the way most people will use it: two jars side by side in each front bay (peppercorns, chilli flakes, dried herbs, turmeric, paprika) and, behind them, kraft pouches, foil sachets and herb packets standing in the taller slots. Everything is visible from the front, which helps when you cook from a recipe and need one spice quickly.

Plywood, bed size and time

The 3 mm file takes about 21 min 59 s on a 10 W diode, about 9 min 10 s on a 40 W CO2 and about 4 min 24 s on a 100 W CO2. Its layout is 1080 × 272 mm, longer than most hobby beds, so plan two or three sheets: the base and back on one, sides and dividers on the others. Birch plywood in 3 or 4 mm is easy for a diode; 5 and 6 mm need several passes or a CO2 machine. Glue is optional here, as the dividers brace the walls once they are in.

Selling it as a set

This tray pairs well with a six-jar starter kit: sell the box empty, or filled with your own blends in labelled jars. For a kitchen shop or farmers market stall, make one in 6 mm as a sturdy counter display for spice sachets. A short line of engraving on the low front, such as a family name, is easy to add yourself before cutting.

Questions about this file

Why is the front row lower than the back row?

The front wall is 44 mm and the cross divider 61.7 mm, against an 80 mm back. Short jars sit in front where you can see their lids, and taller pouches stand behind them.

Will it fit inside a kitchen drawer?

It is 80 mm tall at the back, so it suits most deep drawers; measure the drawer height first. For a shallow drawer, scale the box but correct the slot width to your plywood thickness afterwards.

Can I make this tray from MDF?

Yes, use the file for the MDF thickness you have. Seal MDF well, because raw edges swell faster than plywood when they get damp.

Do the three-by-two dividers need glue?

No need, they hold each other in place. Glue only the outer joints if you want the tray to stay rigid when lifted full.

What finish suits a spice tray on the counter?

Clear matte lacquer keeps the light birch colour and wipes clean. Food-safe oil warms the tone but needs a refresh now and then.

Similar files