DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Small light birch plywood spice caddy with a low front and three slots holding six silver-lidded jars, zip spice pouches and single-portion sachets, on a pale kitchen counter.Visualization
DW-101091 · UPDATED 11/21/2026

Small Sloped Spice Caddy DXF, Three Slot Spice Sachet Holder SVG, Compact Seasoning Pouch Bin Laser Cut File

A free laser cut file for a small open spice caddy with three slots side by side and a front wall half the height of the back, so the sides slope down toward you. It measures 240 × 180 × 80 mm (9.45 × 7.09 × 3.15 in), is cut from 7 plywood pieces that assemble with tabs and slots, and holds small jars, pouches and sachets. Download includes SVG and DXF cut files for 3, 4, 5 and 6 mm plywood.

Author
DXF World · 530 files
Formats
SVG, DXF
Outer size (W × D × H)
240 × 180 × 80 mm (9.45 × 7.09 × 3.15 in)
Parts
7
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
860 × 272 mm
Cut length
4.53 m
Est. time, 10 W diode (3 mm)
15 min 06 s
Est. time, 40 W CO2 (3 mm)
6 min 17 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Take the file that matches your plywood and cut one divider with a scrap slot to check that the joint is snug.
  2. 02Cut the seven pieces; on a small bed run the base on its own sheet.
  3. 03Attach the back and two sloped sides to the base, set in the 40 mm front, then press both dividers down into their slots.
  4. 04Ease the front corners with sandpaper, oil the caddy, and put jars, pouches and single sachets in the three slots.

Three slots, three kinds of packaging

This is the smallest open caddy in the spice range, 24 cm wide and 18 cm deep, so it fits on a windowsill, a narrow shelf or inside a cupboard door space. Two dividers create three slots, and the front wall is 40 mm high against an 80 mm back, with the sides and dividers sloping between them.

In the photo each slot holds a different kind of packaging. The left slot takes six small jars with silver lids, two across and three deep: coriander, turmeric, chili flakes and dried herbs. The middle slot holds larger zip pouches of herb blends and paprika, filed upright. The right slot is filled with a row of small paper sachets, the single-portion kind, with a chili sachet at the front.

Quick to cut

Seven pieces: front, back, two sloped sides, base and two dividers. Cutting time for the 3 mm file is about 15 min 06 s on a 10 W diode, about 6 min 17 s on a 40 W CO2 and about 3 min 01 s on a 100 W CO2, which makes it a good batch item. The 3 mm layout is 860 × 272 mm; on a 400 mm bed it splits neatly over three sheets. Tab and slot joints hold without glue, though a drop of wood glue in each corner makes it permanent. A diode takes 3 mm in one or two passes; thicker sheets need more.

Selling and gifting

Because it cuts fast and uses little plywood, it is easy to make in quantity for craft fairs. Sell it filled with three house blends, or pair it with a matching tea-sachet caddy as a kitchen set.

Questions about this file

What fits in each slot?

The photo shows six small jars in the left slot, zip pouches in the middle and single-portion sachets on the right. Tea bags also fit the right slot.

Is it big enough for a drawer?

At 80 mm tall at the back it slips into most kitchen drawers, and the low front makes packets easy to flick through from above.

Can I scale it down for sachets only?

Edit the lengths in the drawing rather than scaling, because scaling narrows the slots so they no longer match your sheet.

Is thin 3 mm plywood sturdy enough here?

Yes, for a box this size 3 mm is plenty and cuts fastest. Use 4 mm if you want thicker, more solid-looking edges.

Can I label the slots?

Add an engrave layer of your own with three short words on the front wall, one below each slot.

Similar files