DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood spice organizer with five compartments: three tall back slots full of seasoning packets and two low front sections holding eight glass spice jars, on a stone kitchen counter.Visualization
DW-101072 · UPDATED 11/17/2026

Spice Packet Organizer SVG, Seasoning Sachet Box Laser Cut File, Two Row Spice Jar Tray DXF

A free laser cut file for an open spice organizer with five compartments: three tall slots at the back for seasoning packets and two long sections at the lower front for jars. It comes as SVG and DXF files for 3, 4, 5 and 6 mm plywood, measures 290 × 180 × 90 mm (11.42 × 7.09 × 3.54 in) and is assembled from 9 pieces with tabs and slots. The front wall is 50 mm high and the sides slope down to it.

Author
DXF World · 335 files
Formats
SVG, DXF
Outer size (W × D × H)
290 × 180 × 90 mm (11.42 × 7.09 × 3.54 in)
Parts
9
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
960 × 282 mm
Cut length
6.03 m
Est. time, 10 W diode (3 mm)
20 min 06 s
Est. time, 40 W CO2 (3 mm)
8 min 22 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Open the SVG or DXF for your exact plywood thickness and cut one test slot to make sure the tabs press in snugly.
  2. 02Cut all 9 pieces from a 960 × 282 mm sheet or split them over two smaller ones.
  3. 03Fit the cross divider and the three short dividers into the base, then add the tall back, the sloped sides and the 50 mm front.
  4. 04Smooth the edges, apply oil or lacquer, and fill the back slots with packets and the front sections with jars.

Packets up high, jars down low

Spice packets are easy to lose because they flop over. Here the back row is the full 90 mm height and split into three slots, so a stack of sachets stands upright and you can sort them by type: herbs in one slot, chili blends in another, garlic and pepper mixes in the third. A long cross divider separates that row from the front.

The front row is lower and has only one divider, giving two long sections. In the photo each holds four small jars side by side, eight in total, with the lids just above the 50 mm front wall. Because the sides slope down, you see every lid at a glance and can lift a jar out without moving the others.

From sheet to counter

The 9 parts sit in a 960 × 282 mm layout. For the 3 mm file, cutting takes about 20 min 06 s on a 10 W diode, about 8 min 22 s on a 40 W CO2 and about 4 min 01 s on a 100 W CO2. A diode handles 3 mm plywood in one or two passes, while 5 or 6 mm calls for a stronger tube or several slow passes.

Start with the base and the long cross divider, add the two tall back dividers and the short front divider, then wrap the walls around them. Tabs and slots hold without glue, but a little wood glue on the outer corners makes it sturdy enough to carry around.

Ideas for sellers

Offer it as a spice gift box filled with three packet blends and eight jars, or sell it empty as a drawer-free pantry fix. Clear oil brings out the birch grain; a second tray in the same size stacks neatly beside it on a shelf.

Questions about this file

How many seasoning packets fit in each back slot?

Each slot is about a third of the 290 mm width, so a stack of ten to fifteen standard flat sachets fits comfortably on edge.

Does this packet organizer need glue to stay together?

No, the tab joints hold on their own. Glue the outer corners if the tray will be moved often or loaded with heavy jars.

Is 3 mm or 4 mm plywood better for this five-section tray?

3 mm gives the lightest tray and the fastest cut on a diode. 4 mm feels sturdier with full glass jars and still cuts in a reasonable time on a CO2.

Can I use the front sections for something else?

Yes, the two long sections also take tea tins, bouillon cubes or small sauce bottles lying low in front of the packets.

How do I add a name or design to the front?

The file has cut lines only, so add your own engraving to the front panel in your laser software. Keep text clear of the tab edges.

Similar files