VisualizationWooden Box With Lid SVG, Spice Storage Box Laser Cut File, Four Compartment Pantry Box DXF
A free laser cut file for a straight-walled spice box with a separate lift-off lid and four compartments in two rows of two. The download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box measures 320 × 160 × 100 mm (12.60 × 6.30 × 3.94 in) and consists of 8 pieces assembled with tabs and slots.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 320 × 160 × 100 mm (12.60 × 6.30 × 3.94 in)
- Parts
- 8
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,128 × 272 mm
- Cut length
- 9.44 m
- Est. time, 10 W diode (3 mm)
- 31 min 27 s
- Est. time, 40 W CO2 (3 mm)
- 13 min 06 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Choose the file for the plywood you have and cut a corner joint on scrap to confirm the tabs press in firmly.
- 02Cut the eight pieces, grouping the lid and base on one sheet if your bed is small.
- 03Join the four walls around the base, glue the corners if you want it permanent, then slot the long and short dividers together and drop them in.
- 04Sand the lid edges round, finish everything with oil and set the lid on top once the jars and packets are in.
Simple box, separate lid
This is the plainest of the closed spice boxes: four walls of equal 100 mm height, a base, two crossing dividers and a flat 320 × 160 mm lid that simply sits on top. Nothing slides or pivots, so there is nothing to bind if the plywood swells a little in a steamy kitchen. Lift the lid off, lean it against the wall as in the photo, and all four compartments are open at once.
The dividers split the inside into four bays of roughly 155 × 75 mm. In the photo they are filled in a checkerboard pattern: four jars of herbs, chili, white pepper and turmeric at the back left, tall seasoning packets at the back right, flat packets at the front left and three jars of pink salt and peppercorns at the front right. Stackable boxes like this also sit well on top of each other in a pantry cupboard.
From file to box
The 8 pieces are front, back, left and right sides, base, one long divider, one short divider and the lid. The 3 mm layout is 1128 × 272 mm; on a 400 × 400 mm bed, put the lid and base on one sheet and the walls on another. For the 3 mm file the job takes about 31 min 27 s on a 10 W diode, about 13 min 06 s on a 40 W CO2 and about 6 min 17 s on a 100 W CO2.
A dab of glue in each corner makes the shell permanent, while the crossed dividers only need pressing into place. Round over the lid edges with sandpaper so it is pleasant to handle.
As a gift
The lid is the obvious spot for decoration. Add an engraved border or a family name yourself, fill the box with four homemade rubs and it makes a good teacher or neighbour gift.
Questions about this file
How does the lid stay in place?
It is a separate flat panel the size of the box that rests on the top edges. It lifts straight off, with no hinge or track.
Can I stack several of these boxes?
Yes, the flat lid gives a level top, so two or three boxes stack neatly in a cupboard as long as the lower ones are not overloaded.
How do I keep the lid from sliding off?
Glue a thin plywood strip or four small blocks under the lid, just inside the walls, so it locates itself when you put it on.
Which plywood thickness suits a lift-off lid box?
3 mm keeps the box light for a drawer or shelf. 4–5 mm feels more solid when the box is carried around full of jars.
Could the lid be cut from acrylic instead?
Yes, a clear or smoked acrylic lid of any thickness works, since it only rests on the walls. Keep the box itself in plywood.
Similar files



