VisualizationSpice Organizer SVG, Sloped Spice Jar Tray Laser Cut File, Seasoning Packet Holder DXF, Counter Caddy
A free laser cut file for a sloped spice organizer with one wide bay for jars on the left and a right-hand column split into three rows for seasoning packets, four compartments in total. The download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box measures 240 × 200 × 100 mm (9.45 × 7.87 × 3.94 in), is made of 8 pieces that assemble with tabs and slots, and its 55 mm front wall lets the sides slope down so labels stay in view.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 240 × 200 × 100 mm (9.45 × 7.87 × 3.94 in)
- Parts
- 8
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 900 × 312 mm
- Cut length
- 5.18 m
- Est. time, 10 W diode (3 mm)
- 17 min 15 s
- Est. time, 40 W CO2 (3 mm)
- 7 min 11 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Pick the SVG or DXF for the plywood you have and cut just the long divider and one side first, to see that the slots close snugly.
- 02Cut the full set of eight parts, splitting the layout across sheets if your bed is under 900 mm long.
- 03Fit the back and both sloped sides into the base, add the low front, then slide in the long divider and drop the two cross dividers into the right column, the lower one at the front.
- 04Sand the slanted edges, wipe on oil or clear lacquer, and load jars on the left and packets on the right.
How the four compartments are arranged
One long divider runs from front to back and splits the box into a wide left bay and a narrower right column. Two short cross dividers, 98.4 mm long, cut that column into three rows, one behind the other. In the photo the left bay holds six round jars with metal caps, two rows of three, and the right rows keep green, yellow and red seasoning packets standing on edge, each colour in its own slot.
The back wall is 100 mm tall and the front only 55 mm, so the side panels drop toward you. Jar caps and packet tops stay visible from the counter, and you can lift a packet out without tipping the box. The cross dividers follow that slope: the one nearer the front is lower (69.4 mm) than the one behind it (84.9 mm).
Cutting it on your machine
All eight pieces sit on a 900 × 312 mm layout. That fits a large CO2 bed in one go; on a 400 × 400 mm diode bed, move the base and back onto a second sheet and the walls and dividers onto a third. Cutting time for the 3 mm file is about 17 min 15 s on a 10 W diode, about 7 min 11 s on a 40 W CO2 and about 3 min 27 s on a 100 W CO2. A 10 W diode handles 3 mm in one or two passes; 5 or 6 mm plywood wants a stronger tube or several slower passes.
Gift and market ideas
Fill it with six small jars of your own spice blends and a few packets of tea for a housewarming box. Sell it at craft fairs in pairs, one for spices and one for drink sachets. A name or a herb sprig engraved on the front, added in your own laser software, makes it personal, and a coat of clear lacquer keeps kitchen splashes off the birch.
Questions about this file
Which jars fit the wide left bay?
The photo shows six round spice jars in two rows of three. Since the back wall stands 100 mm high, taller jars also stay upright there.
Can I resize the organizer to fit a cupboard shelf?
Scaling the drawing also scales the slots, so they stop matching your plywood. Resize it, then set every slot width back to the real sheet thickness before cutting.
Will 3 mm plywood carry a full set of glass jars?
Yes, for a box that lives on the counter 3 mm is fine and cuts fastest. Choose 5 or 6 mm if it will be carried around full or used daily in a busy kitchen.
Do the tab joints need glue?
They hold on their own once pressed home. A drop of wood glue on the base joints makes the box permanent; leave the dividers dry if you might rearrange them.
Will it cope with steam near the stove?
Seal every face and edge with clear lacquer or a hardwearing oil so moisture does not swell the plywood. Wipe it with a damp cloth rather than washing it.
Similar files



