DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood spice organizer with a low sloped front and four sections: glass jars with bamboo lids and seasoning packets in the front row, steel-lidded jars and recipe packets in the taller back row, on a kitchen counter.Visualization
DW-101073 · UPDATED 11/17/2026

Sloped Spice Organizer SVG, Split Level Spice Jar Caddy Laser Cut File, Seasoning Packet Box DXF

A free laser cut file for an open spice organizer with four sections: a lower front row of two and a taller back row of two, behind a low front wall with sloped sides. The download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; the organizer measures 320 × 180 × 100 mm (12.60 × 7.09 × 3.94 in) and is made of 8 pieces that fit together with tabs and slots.

Author
DXF World · 335 files
Formats
SVG, DXF
Outer size (W × D × H)
320 × 180 × 100 mm (12.60 × 7.09 × 3.94 in)
Parts
8
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,020 × 292 mm
Cut length
5.89 m
Est. time, 10 W diode (3 mm)
19 min 38 s
Est. time, 40 W CO2 (3 mm)
8 min 11 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Pick the file for your sheet thickness and test-fit the cross divider slot on an offcut.
  2. 02Cut the eight pieces, reorganising them onto two sheets if your bed is under 1020 mm long.
  3. 03Seat the cross divider in the base, add the 60 mm front-row divider and the 100 mm back-row divider, then wrap the back, sloped sides and low front around them.
  4. 04Smooth the slope edges with fine sandpaper, oil the wood and stock the low row with jars and the high row with packets.

Two rows at two heights

The back wall is 100 mm tall and the front only 55 mm, so the sides run downhill toward you. A long cross divider, 77.1 mm high, separates the two rows, and each row has its own short divider: a 60 mm one in front and a full 100 mm one at the back. The result is a low front row you can reach into from above and a taller back row that keeps packets standing.

In the photo the front left section holds four jars with bamboo lids, pink salt, herbs, mustard seed and chili, with flat seasoning packets beside them. The back row repeats the idea one level up: four steel-lidded jars on the left, larger recipe-mix packets on the right. Each section is about 155 mm wide.

Cut it and put it together

You get a front, a back, two sloped sides, a base, the cross divider and two short dividers, 8 pieces in all. The 3 mm layout is 1020 × 292 mm, fairly compact, though a 400 mm diode machine will still need it split onto two or three sheets. For the 3 mm file the laser runs about 19 min 38 s on a 10 W diode, about 8 min 11 s on a 40 W CO2 and about 3 min 56 s on a 100 W CO2.

Start with the cross divider in the base, since both short dividers lock into it. Tabs are snug enough to skip glue, though a few drops in the corners help if the organizer lives in a drawer that gets yanked often.

Selling it

Pair it with eight jars and two seasoning packs as a starter set, or cut a second one in a darker stain for a matching coffee-and-tea version. Customers like seeing it filled, so photograph it stocked.

Questions about this file

Why is the front row lower than the back?

The 55 mm front wall and sloped sides let you see and lift jars at the front, while the 100 mm back keeps taller packets upright behind them.

How big is each section?

Each of the four sections is about 155 mm wide; the front row is shallower than the back. Four small jars fit side by side in one section.

Will 3 mm plywood hold glass jars?

Yes, 3 mm is fine for a row of spice jars on a counter. Choose 4 mm if the organizer will slide in and out of a drawer every day.

Can I use it near the sink for sponges?

Only after sealing it with a few coats of marine or polyurethane varnish, inside the slots too. Raw plywood swells when it stays damp.

Can I engrave labels on the dividers?

You can add text such as salt or herbs as an engrave layer on the front wall or dividers. The file itself has cut lines only.

Similar files