DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood cutlery caddy with a low front, sloped sides and six bays holding forks, spoons, knives and upright chopsticks, on a kitchen counterVisualization
DW-104074 · UPDATED 11/19/2026

Sloped Cutlery Caddy SVG, Silverware Organizer Laser Cut File, Buffet Utensil Holder DXF, Flatware Bin

This free laser file makes an open cutlery caddy with six compartments in two rows and a low front: the front wall is 42 mm high and the sides slope up to a 70 mm back. The caddy measures 350 × 300 × 70 mm (13.78 × 11.81 × 2.76 in), is built from 8 plywood pieces with tabs and slots, and comes as SVG and DXF for 3, 4, 5 and 6 mm plywood.

Author
DXF World · 368 files
Formats
SVG, DXF
Outer size (W × D × H)
350 × 300 × 70 mm (13.78 × 11.81 × 2.76 in)
Parts
8
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,320 × 382 mm
Cut length
7.94 m
Est. time, 10 W diode (3 mm)
26 min 28 s
Est. time, 40 W CO2 (3 mm)
11 min 02 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the file for your plywood thickness and cut a single slot and tab to see whether the joint is snug before the full run.
  2. 02Cut the base, the 42 mm front, the back, both sloped sides, the two long dividers and the cross divider, spreading them over extra sheets if needed.
  3. 03Join the sloped sides and the back to the base, fit the low front, then set both long dividers in place and slide the cross divider through them.
  4. 04Round over the sloped edges with sandpaper, seal the caddy and fill the front row with daily cutlery and the back row with the rest.

Two rows you can see into

Two long dividers run from front to back and make three columns. A single cross divider then separates the low front row from the taller back row, so you get six bays. Because the front wall is only 42 mm and the side panels slope down to it, every handle is visible and easy to grab. In the photo the back row stands forks, spoons and a bundle of chopsticks upright, while the front row holds a second set of forks and spoons plus table knives. That split works well when you keep everyday cutlery in front and spare or guest pieces behind.

Before you cut

The layout is 1320 × 382 mm. A compact laser will need it divided across two or three sheets: base on one, walls and dividers on the others. Cutting time for the 3 mm file is about 26 min 28 s on a 10 W diode, about 11 min 02 s on a 40 W CO2 and about 5 min 18 s on a 100 W CO2. A 10 W diode cuts 3 mm in one or two passes, but 5 and 6 mm call for more power or repeated passes. Assemble the sloped sides and the back on the base, add the low front, then stand both long dividers and finish by sliding the cross divider through them. Glue is optional.

Counter and buffet use

Seal with food-safe oil or a clear lacquer that copes with frequent wiping. This shape is popular on café counters, hotel breakfast buffets and food truck pickup shelves, where guests take their own cutlery. Engrave your logo on the front wall yourself to brand it, or make two to flank a buffet line. At home it is a good grab-and-go caddy for a family dining table.

Questions about this file

What is the point of the 42 mm front wall?

The 42 mm front and sloped sides let you see and reach the handles in both rows without lifting the caddy. The back stays 70 mm high to support taller items.

Can cutlery stand upright in the back row?

Yes, in the photo forks, spoons and chopsticks stand in the back bays. Long pieces lean against the back wall and stay put.

Is this sturdy enough for a busy café counter?

Cut it from 5 or 6 mm plywood and glue the joints, and it will cope with constant use. For home use 3 or 4 mm is plenty.

How do I add my shop logo?

Place your logo as an engrave layer on the front or back wall in your laser software. The file itself contains only cut lines.

Can I change the size to fit my counter?

You can stretch the width in your editor, but keep each slot as wide as your real material so the tabs still lock.

Similar files