DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood box with a lift-off lid leaning behind it and six compartments holding leaf-print and white napkins, cork and terrazzo coasters, toothpicks and straws on a speckled counterVisualization
DW-105044 · UPDATED 11/20/2026

6 Cell Napkin Box With Lid SVG, 3x2 Table Setting Storage Laser Cut File, Dust Free Coaster Box DXF

A free napkin and table-setting box with six sections in a three-by-two grid and a separate flat lid that lifts off and sits on top, keeping napkins, coasters, toothpicks and straws dust-free between meals. The download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; the box measures 350 × 160 × 80 mm (13.78 × 6.30 × 3.15 in) and is cut as 9 pieces with tab-and-slot joints.

Author
DXF World · 415 files
Formats
SVG, DXF
Outer size (W × D × H)
350 × 160 × 80 mm (13.78 × 6.30 × 3.15 in)
Parts
9
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,394 × 332 mm
Cut length
10.24 m
Est. time, 10 W diode (3 mm)
34 min 08 s
Est. time, 40 W CO2 (3 mm)
14 min 14 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Open the file made for your plywood thickness and cut a test slot so you know the tabs will seat without forcing.
  2. 02Cut the 9 pieces, giving the lid and base their own job if your bed is under 1394 mm long.
  3. 03Build the walls around the base, set in the long divider, press the two short dividers across it, and check that the lid sits flat on top.
  4. 04Sand the lid on both faces, apply a clear finish to every part, and load the six sections before setting the lid back on.

A covered table-setting box

A long divider and two short ones split the inside into three sections at the back and three at the front, and a flat 350 × 160 mm panel rests on top of the walls as a lift-off cover. With the lid on, the box stacks on a shelf or goes into a sideboard; with it off, it sits on the table as a serving caddy. In the photo the back row holds leaf-print napkins, a stack of cork coasters and a glass of toothpicks, and the front row takes plain white napkins, a terrazzo coaster set and a handful of steel and gold straws laid flat. There is no hinge or catch: the lid simply lifts away.

Cutting time and sheet size

The 9 parts are spread over a 1394 × 332 mm layout, so on a 400 × 400 mm diode bed you will cut the lid and base in one run and the walls and dividers in another. Estimated time for the 3 mm file: about 34 min 08 s on a 10 W diode, about 14 min 14 s on a 40 W CO2 and about 6 min 50 s on a 100 W CO2. 3 mm birch usually needs one or two diode passes; 5 or 6 mm needs more passes or a CO2 tube. The file contains cut lines and no engraving.

Finishing and gift ideas

The joints hold dry; glue the walls to the base if the box will be carried around full. Sand both faces of the lid well, since it is the part everyone sees, and finish with oil or water-based lacquer. Ideas: engrave a monogram on the lid for a wedding or housewarming gift, fill it with seasonal napkins and coasters as a hostess present, or brand the lid with a cafe logo for a self-serve counter.

Questions about this file

Does the lid hinge or lock?

No, it is a flat panel that rests on the walls and lifts off. That keeps the build simple and lets you set the lid aside while serving.

What fits under the lid?

Anything shorter than the 80 mm walls: folded paper napkins, coasters laid flat or on edge, a short glass of toothpicks and straws lying flat in a front section.

Can I scale it to fit my own napkins?

Scale the whole drawing, then reset slot widths to the real sheet thickness; otherwise the dividers and walls will not lock properly.

How do I add a logo or name to the lid?

Place your artwork on the lid outline in your laser software and run it as an engrave layer before the cut. The download itself has only cut lines.

Which thickness makes the sturdiest lid?

4 or 5 mm plywood keeps a 350 mm lid from bowing over time. 3 mm is fine for a lighter box that mostly stays on the table.

Similar files