VisualizationNapkin Display Stand SVG, 15 Slot Tiered Straw Rack Laser Cut File, Cafe Condiment Station DXF
A free wide napkin display stand with three steps rising to the back and five slots on each step, 15 in total, sized for napkins, coasters and straws. Download SVG and DXF files for 3, 4, 5 and 6 mm plywood; the stand measures 350 × 200 × 180 mm (13.78 × 7.87 × 7.09 in) and is built from 21 pieces with tab-and-slot joints.
- Formats
- SVG, DXF
- Outer size (W × D × H)
- 350 × 200 × 180 mm (13.78 × 7.87 × 7.09 in)
- Parts
- 21
- Material thickness
- 3, 4, 5 or 6 mm plywood (a file for each)
- Layout size (3 mm file)
- 1,420 × 313 mm
- Cut length
- 12.60 m
- Est. time, 10 W diode (3 mm)
- 42 min 00 s
- Est. time, 40 W CO2 (3 mm)
- 17 min 30 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Select the folder for your plywood thickness and cut a small test piece with one slot to dial in power and kerf.
- 02Cut the 21 parts across two or three sheets, keeping each sheet's pieces together so the engraved numbers stay easy to sort.
- 03Join the shelves, step boards, front board and brace to the two side panels, then drop the twelve dividers into place, four per step.
- 04Sand, lacquer, and stock the stand with five napkin designs on top, coasters in the middle and straws along the bottom step.
Built for variety
At 350 mm wide and 180 mm tall, this stand is broad and low, and every step is split by four dividers into five slots. That fifth column matters when you offer choices: the photo shows five napkin styles on the top step, five coaster materials in the middle (cork, speckled stone, slate grey, marble and bamboo) and, along the front, toothpicks next to striped paper, bamboo, steel and glass straws. The steps are shallow, so short items are not hidden behind tall ones, and the stand still fits on a counter below a wall cabinet.
File size and cutting time
The 3 mm layout stretches to 1420 × 313 mm, so plan to cut it on two or three sheets on a typical diode bed. Every piece carries a small engraved part number, which helps sort twelve near-identical dividers. For the 3 mm file allow about 42 min 00 s on a 10 W diode, about 17 min 30 s on a 40 W CO2 and about 8 min 24 s on a 100 W CO2. The 5 and 6 mm files suit a CO2; on a diode they take many passes.
Selling and setting up
Cafes use a stand like this as a self-serve condiment and straw station, so offer it with the shop's name engraved on the front board. Craft sellers can bundle it with five packs of napkins, and party rental businesses can keep several for events. Join the sides to the shelves and boards first, then the brace, and add the dividers last; glue the shelves for a stand that will be carried from venue to venue. Two coats of satin lacquer keep it easy to wipe.
Questions about this file
How much does each slot hold?
Each slot is about 65 mm wide: enough for a stack of folded beverage napkins, a short pile of coasters or a handful of straws.
Why are there 21 pieces?
Two sides, a front board, two step boards, three shelves and a back brace make the frame, and twelve small dividers split the steps into five slots each.
What bed size do I need?
The shelves and boards are 350 mm long, so your bed must be longer than that in one direction. Every other piece is smaller.
Does it need a finish?
Bare plywood marks easily from wet glasses. Satin lacquer or hard-wax oil makes it wipeable and keeps the color even.
Can I make it in acrylic or MDF?
MDF works with the same files for a painted stand. Acrylic is possible, but long thin shelves in acrylic can crack at the slots, so plywood is the better choice.
Similar files



