DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Light birch plywood crate with eight compartments in a four by two grid on a kitchen counter, oils and vinegars in the back row and ketchup, mustard, soy sauce and a dressing in front.Visualization
DW-106018 · UPDATED 11/17/2026

Condiment Crate SVG, 8 Compartment Bottle Box Laser Cut File, Wooden Grid Organizer For Oils And Sauces DXF

An open crate with a grid of eight equal bays, four across and two deep, for oil, sauce and dressing bottles. The free download has SVG and DXF files for 3, 4, 5 and 6 mm plywood; the crate measures 320 × 220 × 90 mm (12.60 × 8.66 × 3.54 in), has 9 pieces including four interlocking dividers and goes together with tabs and slots.

Author
DXF World · 335 files
Formats
SVG, DXF
Outer size (W × D × H)
320 × 220 × 90 mm (12.60 × 8.66 × 3.54 in)
Parts
9
Material thickness
3, 4, 5 or 6 mm plywood (a file for each)
Layout size (3 mm file)
1,100 × 416 mm
Cut length
10.30 m
Est. time, 10 W diode (3 mm)
34 min 21 s
Est. time, 40 W CO2 (3 mm)
14 min 19 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Choose the file for your sheet thickness and cut two dividers first to test that their notches slide together snugly.
  2. 02Cut the nine parts, running the base as its own job if the 1100 × 416 mm layout overhangs your bed.
  3. 03Interlock the three short dividers with the long one, set the grid on the base and close the four walls around it.
  4. 04Sand, finish with food-safe oil or lacquer and stand one bottle in each of the eight bays.

A full-height grid

Three short dividers run front to back and one long divider runs across; they notch into each other like an egg crate, so all four stand the same 90 mm as the walls. The result is eight bays of roughly 75 × 105 mm, each deep enough to brace a bottle on every side. The photo shows the back row with herb-infused oil, red wine vinegar, oil with peppercorns and plain olive oil, and the front row with ketchup, whole-grain mustard, soy sauce and a garlic dressing.

Because there is no sloped front, this crate is also easy to lift by its sides and carry to the table or the barbecue with everything still upright.

Cutting notes

The nine parts lay out at 1100 × 416 mm. On a typical 400 mm wide bed that is tight, so run the base alone and nest the walls and dividers in a second file. The 3 mm file needs about 34 min 21 s on a 10 W diode, about 14 min 19 s on a 40 W CO2 and about 6 min 52 s on a 100 W CO2. For 6 mm plywood a CO2 is strongly recommended.

Slot the three short dividers onto the long one before anything else and check that the grid sits square. Stand it on the base, then bring the four walls in around it so the divider ends catch in their slots. Glue at the corners is optional; the grid holds well enough dry.

Ideas for markets and kitchens

Fill one with eight small bottles of flavoured oils and vinegars for a tasting gift, or sell it empty as a pantry crate. Food trucks and taco stands can keep sauces in it on the counter. Branding the long front wall with a logo engraved after cutting turns it into a shop display, and a food-safe oil finish keeps it easy to wipe.

Questions about this file

What bottles suit the bays?

Each bay is about 75 × 105 mm, enough for a 250 ml oil bottle or a standard ketchup or mustard jar. The crate is open on top, so height does not matter.

Do the dividers rattle when the crate is carried?

No. Their ends sit in slots in the walls and they notch into each other, so the grid stays rigid even when the crate is lifted full.

Which thickness is sturdiest for carrying full bottles?

6 mm plywood gives the stiffest crate for eight full glass bottles. 3 or 4 mm is fine when it stays on the counter.

Can I make it bigger for wine or larger oil bottles?

Scale the outline in your design program, then correct every slot and notch back to your plywood thickness so the joints still fit.

Will it handle sticky sauce drips?

Seal the inside with lacquer or hard wax oil before use. Sauce then wipes off with a damp cloth instead of staining the bare wood.

Similar files