VisualizationDecorative Photo Frame SVG, Baroque Mirror Frame Laser Cut File, Scroll Lattice Frame DXF, Ornate Picture Frame
A two-layer ornate frame: a fretwork front with scrolls, a pointed leaf crest, three lattice panels and a rectangular window, plus a solid backing board with a wavy outline slightly larger than the front. The free SVG and DXF hold cut lines only for both parts side by side on 369.5 × 217.3 mm (14.55 × 8.56 in), and the frame can be scaled for a bigger photo or mirror.
- Formats
- SVG, DXF
- Size
- 370 × 217 mm (14.55 × 8.56 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 5.61 m
- Est. time, 10 W diode (3 mm)
- 18 min 41 s
- Est. time, 40 W CO2 (3 mm)
- 7 min 47 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Check the window size in your software and scale the file if your photo or mirror needs a bigger opening.
- 02Cut the front from one colour of sheet and the backer from another, or paint them separately.
- 03Fix the photo or mirror acrylic to the backer, centred under where the window will sit.
- 04Glue the front on top, clamp it flat, and add a back brace or wall hangers.
Two parts that stack
The front layer carries all the decoration. Leafy scrolls curl around a rectangular window, a pointed crest sits on top, and three cross-hatched lattice panels fill the two upper shoulders and the bottom center. The second part is a plain board with soft, wavy edges that follow the front; it is a little larger, so it shows as a coloured margin around the fretwork. The photo shows exactly that: a mustard yellow backer under a cream front, standing on a table.
Fitting a photo or mirror
There is no rebate, so the picture is sandwiched between the layers. Measure the window in your software and trim your print or a sheet of mirror acrylic about 5 mm larger on every side, then glue it to the backer before the front goes on. For real glass, draw a third spacer layer with the same window so the glass gets a pocket. Scaling up for a larger picture is easy; the lattice bars are the thinnest parts, so check them before you scale down.
Finishing and gift ideas
Paint the two layers in contrasting colours before gluing, which is much easier than masking later. Glue a triangular brace to the back to stand it on a shelf, or fit two sawtooth hangers for the wall. It works as a wedding or christening photo gift, a small vanity mirror for a girl's room, a name sign with the name engraved on the backer inside the window, or a gold and white pair for a romantic table.
Questions about this file
Does the frame fit a standard photo size?
Measure the window in your software; at the file size it suits a small print. Scale the whole file until the window is slightly smaller than your photo.
Can I put a glass mirror in it?
Yes, if you add a spacer layer with the same window so the glass sits in a pocket. Thin mirror acrylic can simply be glued flat.
How do I make it stand on a table?
Glue a wooden triangle or a fold-out leg to the backer, angled slightly back.
Will the lattice break?
The lattice bars are thin at the file size, so cut them in good plywood rather than soft MDF, and avoid scaling the frame down.
Can both layers come from one sheet?
Yes, they already sit side by side in the layout. Use two sheets only if you want two materials or colours.
Similar files



