DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Large birch plywood golf cart cut-out with a golf bag and raised round wheels standing on a rug in a bright roomVisualization
DW-300026 · UPDATED 11/20/2026

Golf Cart SVG, Golf Buggy Silhouette DXF, Golfer Gift Laser Cut File, Golf Cart Wall Decor

A side view of a golf cart with an open cab, a roof, a steering wheel and a golf bag full of clubs on the back. You can download it free as an SVG and a DXF holding only cut lines, 109.1 × 72.7 mm (4.3 × 2.86 in), easy to scale. The body and the two round wheels cut as three separate pieces, and the wheels are glued back on as a raised layer.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
109 × 73 mm (4.30 × 2.86 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
0.72 m
Est. time, 10 W diode (3 mm)
2 min 23 s
Est. time, 40 W CO2 (3 mm)
1 min 00 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the cart to your project and check that the club shafts stay at least 2 mm wide.
  2. 02Cut the body and the two wheel discs, from the same sheet or from a darker wood.
  3. 03Sand the edges and paint the wheels and the roof if you want contrast.
  4. 04Glue the wheels over the round notches in the body, then add a stand, a magnet or a hanging cord.

Body and wheels

The cart body includes the roof, both pillars, the seat, the steering wheel and the golf bag with three club heads. The wheels are full circles that overlap the body line, so they drop out as two discs and leave round notches in the body. Glue them back over the notches, as in the photo, and they stand proud of the body like real tyres. Cut them from a darker wood or paint them black for contrast.

Scaling and material

At 109.1 mm the cart works as an ornament, a fridge magnet or a cake topper in 3 mm plywood or acrylic. The club shafts and the steering column are the thinnest parts, so check them in your software before shrinking the design further, as thin bridges get weak. For a sign or a standing cut-out, scale it to 400 mm and up; the photo shows a big birch plywood version.

Gift and selling ideas

Golf clubs, pro shops and retirement parties are all good buyers for golf cart pieces. Engrave a name or a course and date on the roof, make place cards for a golf-themed wedding, or turn a large one into a photo-booth frame by holding it up so a face shows through the open cab.

Questions about this file

Why do the wheels come out separately?

They are drawn as full circles that overlap the body. Glue them back on top for a layered look.

What size is it?

109.1 × 72.7 mm as drawn. It scales up cleanly for signs and standing cut-outs.

Can I add a name?

Yes, add an engraved or cut name on the roof or the side panel in your software.

How do I make it stand up?

Glue a small foot block behind each wheel, or cut a slot in a base board for the body.

Which way does it face?

The front points right. Mirror the file for a pair facing each other.

Similar files