DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Black cut-out silhouette of a classic two-door muscle car with five-spoke wheels, standing on a wooden coffee table in a living roomVisualization
DW-300029 · UPDATED 11/20/2026

Muscle Car Silhouette SVG, Classic Coupe Side Profile Laser Cut File, Garage Wall Art DXF, Car Guy Gift

A side-view silhouette of a two-door American-style muscle coupe with a long hood, a sloping roof, a cut-out side window, five-spoke wheels and a thin body stripe. The free download is one SVG and one DXF with cut lines only, 477.5 × 137.2 mm (18.8 × 5.4 in), and it scales up for a garage wall or down for a shelf piece.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
478 × 137 mm (18.80 × 5.40 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
3.31 m
Est. time, 10 W diode (3 mm)
11 min 03 s
Est. time, 40 W CO2 (3 mm)
4 min 36 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the file to your wall or shelf; above 250 mm length keep all slits, below that delete the thin body-line slit.
  2. 02Cut the wheel spokes, window and slits first, then the outer body outline.
  3. 03Sand the edges or deburr steel, then paint or powder coat the panel.
  4. 04Stand it on its tyres with a block behind each wheel, or add two spacers and hang it so it floats off the wall.

Details in the cut

The body is one solid panel. The side window is cut out as a single opening, and each wheel has five spoke-shaped holes around a small hub hole, so the rims read clearly from across a room. A long thin slit runs from the front wheel to the tail for the body line, short slits curve over both wheels to mark the arches, and two tiny oval cuts at the nose and tail stand for the side marker lights. There is no badge, lettering or grille detail, so it works as a generic classic car piece.

The photo shows it cut from black material and standing on its wheels on a coffee table. In 6 mm material it balances on its tyres; thinner sheet needs a small block glued behind each wheel.

Scaling and material

At the drawn 477 mm length, 3 to 6 mm plywood, MDF or acrylic all work. For a garage or workshop wall it scales up well to 1 m or more, and at that size it suits a CNC router in thicker plywood or a plasma table in 2 to 3 mm steel. Reducing it a lot is the weak point: the body-line slit and the wheel-arch slits leave thin strips of material, so below roughly 250 mm length remove those slits or they will burn through.

Finishing and gift ideas

Matt black paint or powder coat gives the clean look of the photo. You can also back the window and the wheel holes with red or chrome acrylic. Engrave a name and a plate number along the lower body for a car enthusiast, cut a set in several sizes for a boy's room, or fit a clock movement in one wheel.

Questions about this file

Does it show a brand logo?

No. It is a plain silhouette with no badge, name or grille emblem, so you can sell it as general car decor.

Can I cut it in steel?

Yes, at a larger size. Scale it to about 1 m long and cut 2 to 3 mm steel on a plasma table or fibre laser; keep the slits wider than the kerf.

Will the stripe slit cut the car in half?

No. It is a narrow closed slot that ends well inside the outline at both ends, so the body stays one piece.

Can I add a name or plate number?

There is room on the lower doors for engraved text, or you can cut letters into a separate plate and glue it under the rear bumper.

Can it stand on a shelf?

Yes. The lowest points of the outline are the two tyres, so it rests on them; a small block glued behind each wheel keeps thin sheet upright.

Similar files