VisualizationSprint Car SVG, Winged Dirt Track Racer DXF, Race Car Wall Art Laser Cut File, Dirt Track Racing Decor
A side view of a winged dirt-track sprint car with a big tilted top wing, an open roll cage, exposed frame tubes and a large rear tyre with a drilled wheel. The free SVG and DXF hold cut lines only for two parts, the car body and the top wing, at 403.9 × 170.2 mm (15.9 × 6.7 in) in total.
- Formats
- SVG, DXF
- Size
- 404 × 170 mm (15.90 × 6.70 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 4.24 m
- Est. time, 10 W diode (3 mm)
- 14 min 09 s
- Est. time, 40 W CO2 (3 mm)
- 5 min 54 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the car to your wall and decide whether the single-line arcs on the tyres should cut or score.
- 02Cut the body and the separate top wing, inner holes first and outlines last.
- 03Sand the frame tube bridges carefully and paint the body and the wing.
- 04Glue the wing above the roll cage, add a car number, then hang or mount it on a base.
What the cut-outs show
The body is one piece. Window openings frame the roll cage, slim cut-outs show the frame tubes along the side, and the wheels carry rings of round holes like real drilled racing wheels. A short arc over the rear tyre and a few curves on the front tyre are drawn as single lines, so they cut as fine kerf lines rather than open windows; set them to score if you prefer a groove. The tall top wing with its swept side plate is a separate piece, so glue it above the cage as in the photo, or cut it from a contrasting colour.
Scaling and material
At the file size of 403.9 mm the frame cut-outs are wide enough for 3 to 6 mm plywood. Shrinking it below about 250 mm makes the tube bridges fragile. For the garage or a race shop wall, scale it to a metre and cut it from steel with plasma, or from 6 mm MDF on a CNC router.
Ideas for racing fans
Paint the body in a driver's colours and add their car number on the wing, a classic way sprint car teams decorate. Make a trophy plaque by mounting the car on a stained board with the track name and date engraved below. Small versions on a stand suit a racing-themed kids room, and fans of the local dirt track appreciate them as birthday gifts.
Questions about this file
Why is the wing a separate piece?
The wing floats above the cage in the file. Glue it to the cage top or to the backing board so it sits like the real wing.
What are the thin lines on the tyres?
They are single lines, not closed shapes, so the laser cuts a thin slit. Set them to score or engrave if you want a groove instead.
Can I add a race number?
Yes. Add the number to the wing side plate or the body as engraving, or paint it on after cutting.
How large can I go?
As large as your machine allows. Large steel versions from a plasma table look great on a shop wall.
Is it a specific team's car?
No, it is a generic winged sprint car with no logos or sponsor decals.
Similar files



