VisualizationRace Car Silhouette SVG, Open Wheel Racer Side View DXF, Motorsport Fan Laser Cut File, Racing Car Shelf Decor
A flat side-view silhouette of a modern single-seater race car with a tall rear wing, an airbox above the driver, exposed wheels and a long nose with a front wing. The free SVG and DXF hold one solid cut outline at 90.9 × 23.6 mm (3.58 × 0.93 in), small enough for a keychain and easy to scale up for a shelf or wall piece.
- Formats
- SVG, DXF
- Size
- 91 × 24 mm (3.58 × 0.93 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 0.29 m
- Est. time, 10 W diode (3 mm)
- 58 s
- Est. time, 40 W CO2 (3 mm)
- 24 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the car to the size you need and join the outline's start and end node if your software marks it open.
- 02Cut it from plywood, MDF or acrylic; use 6 mm material if the car should stand on a shelf.
- 03Sand the front wing and the edges under the nose, where the shape is thinnest.
- 04Paint it in racing colours, engrave a number, and add a magnet, a key ring or a base.
A clean one-piece outline
The whole car is a single contour with no inner holes: rear wing, engine cover, airbox, cockpit, the two wheels and the long nose with its front wing all merge into one solid shape. That makes it fast to cut and very robust, and it reads instantly as a racing car even from across a room. The only fine areas are the slim front wing and the narrow gap under the nose.
Sizes that work
At the file size, 90.9 mm long, it suits keychains, fridge magnets, cake toppers and gift tags in 3 mm plywood or acrylic. Scaled up to 400 to 600 mm it becomes a freestanding shelf piece like the matte black one in the photo, best in 6 mm MDF or plywood so it stands upright on its flat base. For a garage wall, a steel plasma-cut version at a metre long looks great. The outline's start and end points are a fraction of a millimetre apart; if your software reports an open shape, join that one node before cutting.
Gift ideas for racing fans
Paint it in a fan's favourite team colours, engrave a race number on the side pod, or cut a row of cars from different coloured acrylic for a kids room. Small ones make good party favours and place cards for a racing-themed birthday.
Questions about this file
Can the race car stand on a shelf without a base?
At a large size in 6 mm material the flat bottom edge lets it stand, as in the photo. Small versions need a base or a slot in a block of wood.
Can I make a keychain from it?
Yes, at the file size. Add a small hole in the rear wing for the ring in your software before cutting.
Why does my software say the shape is open?
The start and end points are a tiny distance apart. Use the join or close-path command and it cuts as one clean outline.
Does it have wheel or cockpit details?
No, it is a pure silhouette. Engrave or paint details on top if you want them.
What material looks most like a real car?
Glossy coloured acrylic, or plywood sprayed in a high-gloss paint, gives the shiny bodywork look.
Similar files



