DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Large black five-point star inside a round ring hung on a cream wall beside a window and a bookshelfVisualization
DW-300104 · UPDATED 11/21/2026

Barn Star in Circle SVG, Western Texas Star Wall Sign Laser Cut File, Rustic Ring Star DXF, Plasma Cut Star

A large one-piece wall sign: a solid five-point star set inside a round ring, with the five star tips joined to the ring and five open windows between them. The free download is one SVG and one DXF file, 579.1 × 579.1 mm (22.80 × 22.80 in), cut lines only, for plywood, MDF or acrylic on a laser and for steel on a plasma table or CNC router.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
579 × 579 mm (22.80 × 22.80 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
4.86 m
Est. time, 10 W diode (3 mm)
16 min 11 s
Est. time, 40 W CO2 (3 mm)
6 min 45 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the star to the size you need and check that it fits your bed, router table or plasma table.
  2. 02Cut the five windows first and the outer circle last so the sheet does not shift.
  3. 03Sand or grind the edges, then paint, stain or rust-finish the face and back.
  4. 04Fix one screw or two brackets behind the ring and hang the sign level.

A bold shape with few cuts

The file has only six contours: the outer circle and the five windows around the star. That makes it one of the quickest large pieces you can cut, and it holds together well because every star point is tied into a ring about 50 mm wide. The photo shows it in matte black metal hung on a cream wall, but the same file works as a painted plywood sign over a porch door, a barn wall or a farmhouse fireplace.

Scaling and material

At the drawn 579 mm the sign needs a bed of at least 600 × 600 mm, or a CNC router or plasma table. For smaller hobby lasers, scale it down; the shape has no thin bridges, so it stays strong even at 200 mm for a shelf or a gift. For outdoor use, cut it from 1.5–3 mm steel on a plasma table, or from exterior plywood or PVC board with a CNC router, and seal every edge. Indoors, 6 mm MDF painted black or barn red looks right for a western room.

Finishing and hanging

  • Plywood: stain dark, then dry-brush white along the edges for a weathered look.
  • Steel: clean off scale, prime and paint, or let it rust and seal with clear coat.
  • Hang it from one screw at the top of the ring, or two small brackets behind the left and right sides so it does not spin.

It makes a good Texas or ranch gift, a house-warming piece, or a matched pair for gate posts.

Questions about this file

Is the star one piece with the ring?

Yes. All five tips touch the ring, so the whole sign comes out of the sheet as one solid part.

Can I cut it on a small laser?

Scale it to fit your bed. The shape is so simple that it stays sturdy at 200–300 mm.

Is it suitable for plasma cutting?

Yes. Six large closed shapes and no fine detail make it an easy plasma job in 1.5–3 mm steel.

How do I make it two-tone?

Cut the file twice. Use one copy as the frame and paint it, then glue a second star cut alone from a contrast color on top.

Will it survive outdoors?

Steel with a good paint system or sealed rust finish does. Plywood needs exterior grade and sealed edges, and still lasts best under a roof.

Similar files