DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Matte black ring with feathered wings on both sides standing on a light wooden table in a sunny roomVisualization
DW-300071 · UPDATED 11/21/2026

Winged Mirror Frame SVG, Round Mirror Surround With Wings DXF, Feather Wing Wall Decor Laser Cut File, Angel Wing Ring

A single-piece cut-out of a round ring flanked by sweeping, feather-edged wings that curve up and out on both sides, with two lower wing tips forming a base. The free SVG and DXF files measure 922.9 × 474.9 mm (36.33 × 18.70 in). Glue a round mirror behind the ring for a winged wall mirror, or hang or stand it on its own as a bold wall piece.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
923 × 475 mm (36.33 × 18.70 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
8.66 m
Est. time, 10 W diode (3 mm)
28 min 53 s
Est. time, 40 W CO2 (3 mm)
12 min 02 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the ring to the mirror size you want, keeping the wing tips at least a few millimetres wide.
  2. 02Cut the round opening first and the winged outline last.
  3. 03Sand the feather notches smooth and paint or seal the piece.
  4. 04Glue a round mirror behind the ring, or add a hanger or prop it upright on a mantel.

One piece, two uses

The whole design is one outline plus the round opening, so there is nothing to assemble. With a mirror disc glued behind the ring it becomes an entryway or bedroom mirror; without one, the open circle frames the wall behind it and works as an emblem over a bed, a sofa or a shelf. The lower wing tips sit level, so the piece also stands on a mantel or a console table, as in the photo, where it is painted matte black.

Scaling and material

At the drawn width of about 92 cm a router cuts it well from 12 to 18 mm MDF or birch ply, and a plasma table can cut it in steel for a metal sign. Scaled to fit a laser bed, 6 mm plywood or black acrylic holds up well. The feather notches and the slim tips of the inner wings are the weak spots; if you shrink the file a lot, thicken those tips in your software or cut from a stiffer material.

Finishing ideas

Matte black, as shown, gives a modern silhouette. Gold leaf or metallic paint turns it into an angel wing mirror for a nursery or a bridal suite. For a mirror, measure the inner ring and order a round glass or acrylic mirror slightly bigger, then fix it from behind with mirror adhesive.

Questions about this file

Is the mirror part of the file?

No, the file is the winged frame only. Measure the ring opening and buy a round mirror a little larger to glue behind it.

Can it stand without hanging?

Yes, the two lower wing tips are level and the piece stands on a flat surface; a small back prop makes it steadier.

Does it work as a metal piece?

Yes, the bold shapes suit a plasma or fibre laser cut in thin steel, then a black powder coat.

Can I add a photo instead of a mirror?

Yes, put a round photo or a clock movement in the ring for a winged picture frame or clock.

What thickness should I cut it from?

Use 6 mm on a laser for small sizes and 12 to 18 mm board on a CNC at full width.

Similar files