DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Tall taupe painted mirror frame with scrollwork down both sides leaning against a cream wall beside a windowVisualization
DW-300068 · UPDATED 11/21/2026

Full Length Mirror Frame DXF, Scroll Floor Mirror CNC File, Carved Look Leaner Mirror SVG, Ornate Wall Mirror Plans

A tall rectangular mirror surround with pierced C-scrolls running down both long sides and a shell fan at the top and bottom centre. Free to download, the SVG and DXF are drawn at 770.7 × 1710.4 mm (30.34 × 67.34 in) for a router table or a big-format laser. The file has the scroll frame with a plain inner border and a separate centre rectangle that drops out of the window.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
771 × 1,710 mm (30.34 × 67.34 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
30.61 m
Est. time, 10 W diode (3 mm)
102 min 02 s
Est. time, 40 W CO2 (3 mm)
42 min 31 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Decide on the final height, scale the file and plan how the glass will sit behind the window.
  2. 02Cut the scrolls and the window first, then the outer outline, in 18 mm MDF or plywood.
  3. 03Round over and sand the edges, prime and paint the frame.
  4. 04Fix the mirror to the back with mirror clips or adhesive and add a cleat or stand for hanging.

What is in the file

The main piece is the frame: a flat inner border around a tall window, wrapped in symmetrical scrolls that curl outward on both sides, with a fan motif at the top and bottom middle and four small square holes near the corners. The window centre comes out as its own rectangle. Keep it as a backing board or as a template when you order the glass. Order the mirror a little larger than the window so it can be glued or clipped to the back of the frame.

Material and cutting

At full size this is a CNC router job in 18 mm MDF or birch plywood, like the warm taupe painted version in the photo. On a laser bed it will need scaling down, which turns it into a wall mirror or a photo frame; keep an eye on the narrow necks where the scrolls meet the border, since they lose strength as the file gets smaller. If your CAM software reports open shapes, run its join command before toolpathing.

Finishing and hanging

Round over the outer edges with a small radius bit to give the scrolls a carved look. Prime MDF edges twice before the top coat, because the cut edges soak up paint. A full-length mirror is heavy: screw a batten or French cleat to the back, or lean it against the wall on a non-slip pad. Antique gold, chalk white or a dark wash all suit the style.

Questions about this file

Does the file include the mirror glass size?

The centre rectangle shows the window. Have the glass cut slightly larger so it overlaps the back of the frame.

Will it fit a laser bed?

Only scaled down, unless your bed is very large. Smaller versions make good vanity mirrors or ornate photo frames.

What are the small square holes for?

There are four near the corners. Use them for screws or mirror clips, or fill them if you do not need them.

Which board should I use?

18 mm MDF paints smoothly and is cheap; birch plywood is lighter and stronger at the thin scroll joints.

Can I make it a headboard instead?

Yes, scale it to the bed width, leave out the glass and fill the window with fabric or a painted panel.

Similar files