DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Two-panel folding screen with a Chinese lattice pattern, one panel painted red and one navy, standing on a rug in a living roomVisualization
DW-300080 · UPDATED 11/21/2026

Folding Screen SVG, Chinese Lattice Room Divider DXF, Two Panel Fretwork CNC File, Asian Window Grille Pattern

Two identical tall panels with a straight-line Chinese lattice of rectangles, small squares and L-shaped openings, made to be hinged together as a folding screen. As drawn, the pair of panels measures 191.2 × 258.8 mm (7.53 × 10.19 in) in both free formats, SVG and DXF, so the pattern scales up to full room-divider height or down to a miniature. Every opening has square corners and an even frame width, which suits both a laser and a CNC router.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
191 × 259 mm (7.53 × 10.19 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
9.13 m
Est. time, 10 W diode (3 mm)
30 min 25 s
Est. time, 40 W CO2 (3 mm)
12 min 40 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale both panels to the height you need and confirm the lattice bars stay at least 15 mm wide on a full-size screen.
  2. 02On each panel, clear the lattice holes before releasing the outer frame.
  3. 03Smooth every inner corner with sandpaper, then prime and paint or oil both panels.
  4. 04Screw two or three hinges between the panels and stand the screen in a zigzag.

The pattern

Each panel has a solid outer frame and a lattice of straight bars dividing the inside into long rectangles, small squares and stepped L-shapes, repeated three times from top to bottom with short slots at both ends. The two panels are the same, so they fold flat against each other and line up when opened. Three or four copies make a wider screen.

Scaling to full size

As drawn, the pair is a small model, handy for a dollhouse or a desk screen. For a real room divider, scale each panel to about 1700 to 1800 mm tall and rout it from 15 to 18 mm birch ply or MDF; the bars then end up a little over 20 mm wide. On a router, the inside corners come out rounded to the bit radius, which looks fine on this design. Check the bar width after scaling; very small versions get fragile.

Assembly and finish

Join the panels with two or three butterfly hinges per side, as in the photo, or double-action screen hinges if it should fold both ways. Bold colours like red and navy make it a feature piece; black or natural wood keeps it calm. It also works fixed to a wall as a headboard, a window grille or a cabinet door insert.

Questions about this file

How many panels are in the file?

Two matching panels. Duplicate them in your software for a three- or four-panel screen.

How tall can I make it?

Any height. Most room dividers are 1700 to 1800 mm tall; just keep the bars thick enough for the material.

Which hinges should I use?

Butterfly hinges for a one-way fold or double-action screen hinges for both directions, two to three per joint.

Can I use one panel as a window grille?

Yes, one panel scaled to the window works as a grille or a privacy insert in a frame.

Does it work in metal?

Yes, the straight bars plasma cut well in steel for an outdoor screen or a gate insert.

Similar files