VisualizationFlower Fretwork Panel DXF, Retro Floral Screen SVG, Decorative Radiator Cover Pattern, Plasma Cut Garden Panel
A rectangular framed screen panel filled with oversized retro flowers: a large daisy, poppy-like blooms with dotted centres, small five-petal flowers and broad veined leaves, all linked into one open fretwork. The free SVG and DXF hold cut lines only and measure 821.2 × 592.1 mm (32.33 × 23.31 in), ready for a CNC router, plasma table or large laser.
- Formats
- SVG, DXF
- Size
- 821 × 592 mm (32.33 × 23.31 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 24.35 m
- Est. time, 10 W diode (3 mm)
- 81 min 11 s
- Est. time, 40 W CO2 (3 mm)
- 33 min 49 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the panel to your opening and check that the smallest centre dots suit your torch, bit or laser.
- 02Cut all inner flower shapes and dots first, holding scraps with tabs on a router, then cut the outer frame.
- 03Clean up the edges with a file or sandpaper and wipe off dust or slag.
- 04Paint or powder coat the panel and screw it into a frame, a cabinet door or a fence.
The pattern
The flowers are drawn big and overlap the frame, so the panel looks like a crop from a 1960s fabric print. Top left is a pointed-petal daisy with a ring of tiny dots in its centre, top middle a five-petal bloom with a beaded centre, and the lower left a large round flower with a single round eye. A star-shaped daisy fills the lower right. Small blossoms and leaf shapes with a centre vein link everything, and a solid border runs around all four sides. About half the surface is cut away, so the panel lets light and air through while still hiding what is behind it.
Uses for a screen this size
At the drawn 821.2 × 592.1 mm it fits as a radiator or AC unit cover front, a cabinet door insert, a balcony privacy panel or a headboard. Repeat it side by side for a room divider; the flowers do not line up across edges, which keeps a row of panels looking natural rather than tiled. The photo shows it in black-painted steel leaning against a wall as a standalone piece of art.
Cutting tips
This is a long cut with many inner shapes and small dots, so plan for it. On plasma, check that the dots in the flower centres are not smaller than your torch can pierce cleanly; enlarge them or delete them if needed. On a router, use a 3 mm bit or smaller for the dots and tabs to hold the inner scrap. Outdoors, choose exterior plywood, HDU board or powder-coated steel, and seal the edges well.
Questions about this file
Is the panel framed?
Yes, a solid border runs around all four sides, which makes it easy to screw into a frame.
Can I use it as a radiator cover?
Yes, the open pattern lets heat through; cut it in MDF or steel and keep a gap behind for air.
Will the panels tile in a row?
They sit side by side frame to frame. The flowers do not continue across the join, which looks intentional.
Are the tiny dots a problem?
On plasma or a large router bit they can be. Enlarge them a little or delete them before cutting.
Which material suits a garden fence?
Powder-coated steel or aluminium, or exterior plywood with sealed edges and outdoor paint.
Similar files



