DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Large black painted snowflake with six forked arms and triangle windows in its centre, mounted on a white wall in a living roomVisualization
DW-300073 · UPDATED 11/21/2026

12 Inch Snowflake SVG, Winter Wall Decor DXF, Snowflake Door Hanger Laser Cut File, Bold Snowflake Window Decoration

A wide, chunky snowflake 12 inches across: a solid centre disc pierced by a ring of triangle windows, six forked arms, open hexagon-style frames between them and a small hanging hole in the top frame. The free SVG and DXF contain cut lines only and measure 304.8 × 276.9 mm (12.00 × 10.90 in), cut as one sturdy piece.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
305 × 277 mm (12.00 × 10.90 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
4.39 m
Est. time, 10 W diode (3 mm)
14 min 38 s
Est. time, 40 W CO2 (3 mm)
6 min 06 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the snowflake for a door, window or tree and check the hanging hole size.
  2. 02Cut the triangle windows and frame openings first, then the outer outline.
  3. 03Sand the edges and paint the flake white, silver, icy blue or black.
  4. 04Thread ribbon or fishing line through the top hole, or screw it to a door or wall.

Why it is so sturdy

This snowflake uses broad, flat bands instead of the thin needles most snowflake files have. The centre disc carries six curved triangle windows around a solid middle, and a second ring of narrow triangles sits just outside it. Six arms end in short branching forks, and the top and bottom carry pentagon frames with V-shaped openings. A small round hole in the top frame takes a ribbon or a nail. Because the bands are wide, the piece survives handling, shipping and outdoor wind far better than a fine lace flake.

Sizes and materials

At the drawn 304.8 mm it is a door or wall size in 3–6 mm plywood or MDF. In the photo it is painted black on a light wall, which looks graphic and modern; white, silver or icy blue suit a classic winter scene. Scale it to 600–900 mm and cut it from exterior plywood or aluminium on a CNC router or plasma table for a porch or a shop window. Shrunk to 80–100 mm it still cuts cleanly as a tree ornament, since nothing in the design is thin.

Decorating ideas

Hang several in different sizes on fishing line in a window for a snowfall effect. Glue a battery LED string behind a large one so light shines through the triangles. Add glitter or white flocking for a frosted edge, or engrave a family name across the centre disc.

Questions about this file

How big is the snowflake?

304.8 × 276.9 mm, exactly 12 inches wide, with a hanging hole in the top frame.

Can I make ornaments from it?

Yes, the wide bands still cut cleanly at 80–100 mm across.

Is it strong enough for outside?

Yes, in exterior plywood, aluminium or steel; the solid centre and wide arms resist wind.

Can I add a name?

The centre disc has room for an engraved name, a year or a short winter word.

How do I light it up?

Mount it a few centimetres in front of a warm LED string so light shines through the triangle windows.

Similar files