DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Oak plywood spider with an hourglass cut-out in its round body and eight long arched legs, hanging on a cream wallVisualization
DW-300069 · UPDATED 11/21/2026

Black Widow Spider SVG, Hourglass Spider Silhouette DXF, Halloween Wall Decor Laser Cut File, Spooky Door Spider

A tall black widow spider seen from above: a round abdomen with an hourglass-shaped opening, a small head with two fangs, and eight long legs, the front four arched up and the back four sweeping down. It is a free SVG and DXF with cut lines only, 208.3 × 325.1 mm (8.20 × 12.80 in), and cuts as one piece.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
208 × 325 mm (8.20 × 12.80 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
2.90 m
Est. time, 10 W diode (3 mm)
9 min 40 s
Est. time, 40 W CO2 (3 mm)
4 min 02 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the spider for your wall, door or porch, keeping the leg tips at least 3 mm wide.
  2. 02Cut it in one pass from plywood, MDF, acrylic or steel.
  3. 03Sand the leg edges, paint the spider black and glue red card or acrylic behind the hourglass.
  4. 04Hang it with a small nail through the hourglass opening or with mounting tape on a door.

The shape

The spider is drawn with long, slender legs that curve out like claws and end in rounded tips, which keeps them from snapping at the ends. The hourglass sits inside the round body as a cut-out, so the wall colour shows through it. Paint the spider black and put red card or acrylic behind the opening, and you have the classic red hourglass mark. Two short fangs point down from the small head between the back legs.

Scaling and material

At 208.3 × 325.1 mm it is a good door or wall size in 3–6 mm plywood or MDF, like the oak-veneer piece in the photo. Scale it to 600 mm or more for a porch, a garage door or a haunted house entrance, cut from 9 mm exterior plywood or steel on a plasma table. If you shrink it for ornaments or earrings, watch the leg tips and fangs, since the narrow bridges get weak under about 120 mm tall.

Halloween ideas

Hang a group of three in different sizes climbing up a wall, or glue a small one to a big paper web on a window. Spray it glow-in-the-dark green for a kids' party. Stick magnets on a small version for the fridge. Cut a version in mirror acrylic for an unusual gothic wall piece that stays up all year. Spiders are also popular as table scatter and as stencils for painted pumpkins.

Questions about this file

Is the hourglass cut out?

Yes, it is an opening in the round body. Put red material behind it for the black widow mark.

How do I hang it?

The hourglass opening fits over a nail head; on a door use mounting tape or a small magnet.

Can it go outside?

Yes, in steel, aluminium or sealed exterior plywood; scale it up for porches and garage doors.

Will the legs break?

They are fine at the drawn size. Under about 120 mm tall the tips get fragile in wood.

Can I use it as a pumpkin stencil?

Cut it from thin card or plastic and trace or paint around it.

Similar files