DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Two black script Ho Ho Ho word pieces displayed with two white slotted rails on a wooden table in a bright roomVisualization
DW-300048 · UPDATED 11/21/2026

Ho Ho Ho Sign SVG, Christmas Word Stand Laser Cut File, Script Santa Laugh Shelf Sign DXF, Holiday Mantel Decor

Two matching free-standing Christmas word signs nested on one sheet: each is a joined script Ho Ho Ho cut as one piece with three tabs along its baseline, plus a long base rail with three slots that holds it upright. The free SVG and DXF hold everything, cut lines only, sized 448 × 305.2 mm (17.64 × 12.02 in); the rail slots measure about 6.2 mm across.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
448 × 305 mm (17.64 × 12.02 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
8.04 m
Est. time, 10 W diode (3 mm)
26 min 48 s
Est. time, 40 W CO2 (3 mm)
11 min 10 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Cut a rail and check that a tab from 6 mm sheet fits its 6.2 mm slots snugly.
  2. 02Cut both script pieces and both rails, cleaning out the counters of the o letters.
  3. 03Match each word piece to the rail whose slots line up with its tabs and press it in.
  4. 04Paint the letters and rails in contrasting colours and stand the signs on a shelf or mantel.

What is on the sheet

The two lettering pieces are identical: one sits the right way up, the other is turned half a turn and tucked into the gaps of the first so they share material. Each word piece has three tabs under the tall H letters, and each of the two rails has three matching slots, so you get two complete signs from one cut. The counters inside the o letters are the only inner cuts. The photo shows both word pieces painted black and displayed together with the two rails painted white.

Material and cutting

The rail slots are about 6.2 mm wide, so the file suits 6 mm plywood or MDF. Pair each word piece with the rail whose slots line up with its tabs, and test one joint before painting. If your sheet is thinner, use a drop of glue rather than shrinking the file, because scaling also shrinks the slots. A 40 W CO2 laser handles 6 mm in one pass; a 10 W diode needs several slow passes.

Finishing and selling ideas

Paint the letters red, black or glitter gold and the rails white or natural, or leave everything raw for a Scandinavian look. One sign goes on the mantel and the second on a window sill or a café counter, or keep one and give one away. They sell well at Christmas markets next to Santa and reindeer decor, and a family name engraved on the rail makes a personal hostess gift.

Questions about this file

Why is one word upside down in the file?

It is a second copy turned around and nested into the first to save material. Both pieces read the same once cut.

What thickness does it need?

The slots are about 6.2 mm, which fits 6 mm plywood or MDF. Measure your sheet and test a tab first.

Can I make it smaller?

Yes, if you scale it to match thinner sheet, for example 50 percent for 3 mm. Test one joint after scaling.

Does it need glue?

Not usually; the tabs sit firmly in the rail. Add glue if the sign will be moved around a lot.

Can I cut it from acrylic?

Yes. Red or mirror gold acrylic letters on a wooden rail look striking; check the slot fit for the acrylic thickness.

Similar files