DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Thick matte black symmetric scroll ornament with a flat top bar and a tulip-shaped opening standing on a wooden table in a living roomVisualization
DW-300037 · UPDATED 11/21/2026

Fretwork Ornament SVG, Tulip Scroll Panel DXF, Furniture Leg Decoration Laser Cut File, Bench End Cutout

A symmetric fretwork ornament with a straight top bar, two mirrored S-scrolls that frame a tulip-shaped opening, outer legs ending in curled feet and a rounded loop at the bottom centre. The free SVG and DXF hold one piece of cut lines at 211.4 × 203.5 mm (8.32 × 8.01 in), a shape that suits furniture legs, shelf aprons and plaques.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
211 × 204 mm (8.32 × 8.01 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
2.44 m
Est. time, 10 W diode (3 mm)
8 min 07 s
Est. time, 40 W CO2 (3 mm)
3 min 23 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the ornament to its job: a box onlay, a shelf apron or a bench end.
  2. 02Choose the material thickness to suit: thin plywood for onlays, thick plywood on a CNC router for furniture parts.
  3. 03Cut it, then sand the faceted curves and the inside corners of the openings.
  4. 04Paint or stain it and fix it by the flat top bar with glue or screws.

Shape and uses

The flat top bar makes this ornament easy to attach: it can butt against the underside of a shelf, a tabletop or a window frame, with the scrolls hanging below. Two thick S-curves meet in the middle and leave a tulip-shaped window between them, smaller teardrop and claw-shaped openings sit beside them, and a rounded loop closes the bottom like a pendant. Scaled up and cut from thick stock, the outline turns into a decorative end for a small bench or a plant stand; cut thin, it becomes a furniture onlay or a hanging plaque. The photo shows it as a thick black freestanding piece on a table.

Cutting and scaling

The strokes are broad, so there are no fragile bridges and the design cuts well at any size, from a 100 mm box decoration in 3 mm plywood up to a 600 mm bench end in 18 mm plywood on a CNC router. The curves are made of short straight segments; enlarged a lot, they show small facets, which a few minutes with a sanding block removes.

Finishing

Painted black or dark bronze it looks like cast iron. For a farmhouse look, stain it walnut and rub the edges with fine sandpaper so lighter wood shows through. Two of them under a floating shelf make a matching pair of brackets in front of the wall.

Questions about this file

Can I use it as a bench or stool leg?

Yes, scaled up and cut from thick plywood. Join two of them with a seat board and a stretcher, and test the strength before use.

Will the curves look smooth?

They are made of straight segments and show slight facets at large sizes. Sand them, or smooth the curves in your vector software.

Does it have mounting holes?

No. Glue it by the top bar, or drill small holes where the top bar is widest.

What size is it at default?

211.4 × 203.5 mm, and it scales freely in both directions because the strokes are thick.

What finish looks like iron?

Matte black spray paint, then a light dry-brush of bronze or graphite on the raised edges.

Similar files