DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Matte black chainsaw with a long chain bar lying on a wooden table in a bright living roomVisualization
DW-300064 · UPDATED 11/21/2026

Large Chainsaw Cutout DXF, Tree Service Sign Blank SVG, Arborist Business Sign Cut File, Life Size Chainsaw Prop

A big side-view chainsaw outline almost 1.2 m long, with a toothed chain running around the guide bar, an open rear grip and a hollow top handle. The free SVG and DXF hold cut lines only and measure 1185.8 × 398.7 mm (46.69 × 15.70 in), sized for a CNC router, a plasma table or a large laser.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
1,186 × 399 mm (46.69 × 15.70 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
8.47 m
Est. time, 10 W diode (3 mm)
28 min 13 s
Est. time, 40 W CO2 (3 mm)
11 min 46 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Decide the final length and material, and split the file at the guide bar if it is longer than your machine bed.
  2. 02Cut the outline and the handle openings on a CNC router, plasma table or large laser.
  3. 03Sand or grind the edges, prime the board and paint the motor body and bar in contrasting colors.
  4. 04Letter a name or phone number on the bar, then hang it from the handle openings or screw it to a post.

A sign blank with real presence

At close to life size, this chainsaw is meant to be seen from the road. The guide bar is long and flat, which leaves room to paint or route a business name, a phone number or a slogan along it. The motor housing has a stepped top with a curved brake lever standing in front of the top handle, and the rear grip and top handle are open, so you can hang the sign from chains through them.

The edge of the bar has small square teeth all the way round. They give the outline a sharp, believable chain without any separate parts.

Cutting it

One piece, one outline and a couple of handle openings: this is an easy job on a CNC router with a 6 mm bit in 12 mm plywood or exterior MDO board. A plasma cutter turns it into a steel sign that survives years outside; the photo shows a matte black finish that suits powder coat or black paint. On a laser, split the file into two halves at the bar and join them on a backing strip if your bed is shorter than 1.2 m. The chain teeth are about the only fine detail, so if you scale the chainsaw down a lot, check that they still cut cleanly.

Where it fits

Tree surgeons, firewood sellers, sawmills and chainsaw carving shows all use a big chainsaw shape on their stands. Painted orange with black teeth it becomes a lumberjack party backdrop, and in grey with fake blood it is a strong Halloween yard prop.

Questions about this file

How big is it?

1185.8 × 398.7 mm as drawn, about 46.69 in long, close to a real saw with a long bar.

Will it fit a laser with a small bed?

Yes, by scaling it down or by splitting it into two parts and joining them on a backing board.

What is the best outdoor material?

Steel or aluminium cut by plasma, or exterior plywood and MDO board sealed with outdoor paint.

Is there text on it?

No, the bar is left blank so you can paint, vinyl or route your own business name on it.

How is it different from a small chainsaw cutout?

This one is a large sign blank with a toothed chain edge and two open handles, made for signs and props rather than tags or cake toppers.

Similar files