DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Large round plywood medallion with a pinwheel spiral centre and petal sprays, hanging on a jute cord near a window and casting a patterned shadowVisualization
DW-300102 · UPDATED 11/21/2026

Swirl Medallion SVG, Pinwheel Mandala Wall Hanging DXF, Spiral Sun Symbol Laser Cut File, Round Folk Ornament Plaque

A large round plaque with a pinwheel of curved, comma-shaped blades spinning around a small centre hole, a dashed ring around it and fan-shaped sprays of petals and curls near the rim, plus a hanging loop on top. The free SVG and DXF hold cut lines only and measure 345.4 × 373.4 mm (13.60 × 14.70 in) including the loop.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
345 × 373 mm (13.60 × 14.70 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
8.01 m
Est. time, 10 W diode (3 mm)
26 min 41 s
Est. time, 40 W CO2 (3 mm)
11 min 07 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the medallion and check that the bridges in the dashed ring stay at least 2 mm wide.
  2. 02Cut the spiral blades, ring slots and petal sprays first, then the outer circle and loop.
  3. 03Sand both faces lightly and oil or stain the wood; a dark stain makes the shadows crisper.
  4. 04Thread jute cord through the loop and hang it in a window or a little way in front of a wall.

The pattern

The middle of the medallion is a spiral of curved blades, each one wide at its outer end and tapering to a point as it curls toward the centre, which gives a strong sense of rotation. A ring of narrow arc slots surrounds the spiral, broken by short bridges that hold the centre in place. Between the ring and the rim, sprays of three or four pointed petals with curled tips fan outward in pairs. The rest is solid wood, so the medallion has a calm, plate-like rim. A small loop with a hole sits at the top, ready for a cord.

Light and shadow

Hung in a window or on a cord a few centimetres in front of a wall, as in the photo, the spinning blades throw a turning-sun shadow that moves with the daylight. Behind it, a round LED panel or a string of fairy lights makes it a wall lamp. For colour, glue tissue paper or thin translucent acrylic behind the openings.

Scaling and material

At 345.4 mm across, 4–6 mm birch plywood keeps it flat and strong. It works as a 100 mm ornament or coaster too, but check the bridges in the dashed ring and the thin petal tips, since they weaken quickly when scaled down. On a CNC router, use a 3 mm bit for the curls. For a garden piece, cut it in steel on a plasma table and let it rust.

Questions about this file

Is the centre held in place?

Yes, short bridges in the dashed ring join the spiral to the rim, so it cuts as one piece.

Can it hang in a window?

Yes, the openings let the light through and cast a pinwheel shadow into the room.

Which thickness suits this size?

4–6 mm plywood at the drawn size; 3 mm is enough when you scale it down for ornaments.

Can I make a coaster from it?

Yes, delete the loop and back it with cork; keep the ring bridges strong at small sizes.

Can I add colour behind the openings?

Glue tissue paper, coloured film or thin translucent acrylic to the back.

Similar files