VisualizationRose Window SVG, Gothic Wheel Window Wall Art DXF, Round Tracery Panel Laser Cut File, Cathedral Window Medallion
A large round panel in the style of a Gothic cathedral rose window: sixteen tall round-ended windows radiate around a smaller ring of sixteen petals and a sunburst hub, framed by straight spokes and a circular rim. The free SVG and DXF hold cut lines only at 864.3 × 862.4 mm (34.03 × 33.95 in), with the tracery in one piece and two thin outer rings that cut free as separate hoops.
- Formats
- SVG, DXF
- Size
- 864 × 862 mm (34.03 × 33.95 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 34.62 m
- Est. time, 10 W diode (3 mm)
- 115 min 24 s
- Est. time, 40 W CO2 (3 mm)
- 48 min 05 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the window to your wall and check the width of the sunburst rays and the two outer hoops.
- 02Cut the hub rays and inner openings first, then the window outline, then the two hoops.
- 03Sand the tracery, paint all three parts, and add coloured film behind the openings if you like.
- 04Hang the window and fix the two hoops around it with small spacers so the gaps stay even.
Tracery and rings
The main piece is the window itself, about 800 mm across: an outer rim, sixteen long windows with rounded ends, a middle ring of sixteen short petal openings, and a solid hub pierced by a sunburst of narrow rays. Straight spokes between the long windows tie everything together, much like stone mullions. Outside this sit two concentric rings with gaps between them. They are not bridged to the window, so you get three parts: the tracery and two hoops. Mount the hoops around the window with small spacers, as the photo shows, or leave them off for a simpler medallion.
Scaling and cutting
The tracery lines are fairly even, so the design survives scaling down to about 400 mm in 3 mm plywood; below that the sunburst rays and the outer hoops get very thin. At full size the panel needs a CNC router, a large laser or a plasma table. Black steel or painted MDF reads best on a light wall; in acrylic over a window, light floods through the openings like stained glass.
Decorating ideas
Back the openings with coloured translucent film or tissue for a stained-glass look, or place an LED strip behind a plywood version for a glowing feature in a hallway or a reading nook. A half-size version above a headboard, painted to match the wall, looks like plaster tracery.
Questions about this file
Why are the outer rings loose?
They are drawn as separate concentric hoops around the window. Mount them with spacers or glue them to a backing to keep the gaps even.
Can I make a stained glass effect?
Yes. Cut it from plywood or acrylic and glue coloured translucent film or acetate behind the openings, then hang it in a sunny window.
How do I cut a panel this large?
Use a CNC router or a large-format laser, or split the design into quarters at the spokes and join them on a backing board.
Is it suitable for a church or chapel?
Its round tracery follows the classic cathedral window form, so it suits chapels, wedding backdrops and memorial walls.
Can I add a clock to it?
Drill a hole in the centre of the hub for a quartz clock movement and add twelve hour markers on the rim.
Similar files



