DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Eight-point star panel with a black frame and black floral arabesque on a white backing board, hanging on a cream wall beside a window and a plantVisualization
DW-300092 · UPDATED 11/21/2026

Moroccan Star Wall Art SVG, Eight Point Star Arabesque DXF, Islamic Pattern Panel Laser Cut File, Tile Motif Onlay

An eight-point star panel in the style of Moroccan and Persian tiles: a wide star-shaped frame, a thin star line inside it and an interlaced floral arabesque in the middle with leaf motifs in each point. The free SVG and DXF hold cut lines only at 713.7 × 713.7 mm (28.1 × 28.1 in); the inner pieces are loose, so they are glued onto a backing board in a contrasting colour.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
714 × 714 mm (28.10 × 28.10 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
32.79 m
Est. time, 10 W diode (3 mm)
109 min 17 s
Est. time, 40 W CO2 (3 mm)
45 min 32 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the panel to your wall and check that the thin star line stays at least 2 mm wide.
  2. 02Cut a backing board the size of the outer star, then cut the frame, the star line and all arabesque pieces.
  3. 03Paint the backing and the pieces in two contrasting colours before gluing.
  4. 04Glue the frame first, then the star line, then the central arabesque and the eight point motifs, and hang the board.

How the pieces fit together

This is an inlay-style design rather than one solid cut-out. The outer star frame is one piece. Inside it sits a narrow star-shaped line that cuts free as its own thin ring, and inside that the arabesque: one large interlaced piece of stems, tulips and rosettes around a small flower in the centre, plus separate leaf motifs that sit in the eight points. Nothing in the middle is tied to the frame, so lay everything out on a backing board and glue it in place. The photo shows black pieces on a white board, which makes the pattern read like a carved tile.

Scaling and material

At the file size the thin star line is fragile in plywood, so cut it from 3 mm birch or MDF and handle it flat. Scaling the panel down below about 400 mm makes the stems and the inner line very thin; enlarging it is easy. For a big feature piece, MDF on a CNC router or a plasma-cut steel version mounted on a painted board both work.

Other ways to use it

The outlines also make a good template for painting a star motif on a floor, a concrete patio or a tiled wall: trace the frame and the arabesque, then fill them with paint. Single leaf motifs from the points can be cut on their own as coasters or ornaments, and a small version glued to a box lid gives it a Moorish look.

Questions about this file

Why does the middle fall out of the frame?

The arabesque and the thin star line are separate pieces, not bridged to the frame. They are meant to be glued onto a backing board, which also holds the design flat.

What colours work best?

High contrast shows the pattern: black on white as in the photo, gold on navy, or natural wood on a dark stained board.

Can I use it as a paint stencil?

Not as one sheet, because the pieces separate. Use the cut pieces as tracing templates for a painted floor or wall pattern instead.

Is it too big for my laser bed?

At 713.7 mm it needs a large bed. Scale it to your bed, or cut it on a CNC router, keeping the thin line wide enough to survive.

How do I align the pieces on the board?

Engrave or pencil the full outline onto the backing first, then glue each piece over its own outline.

Similar files