DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Black steel deer made of vertical ribs with large antlers and a box on its back, standing on a stone floor near a fireplaceVisualization
DW-300031 · UPDATED 11/21/2026

Deer BBQ Grill DXF, Animal Shaped Grill Plasma File, Metal Deer Sculpture SVG, Garden Grill Plans

A large slot-together deer built from vertical ribs, with a head and antlers, two leg frames, separate lower legs and a rectangular charcoal box with air holes and a grate that sits on its back. You get it free as a single SVG plus a matching DXF, cut lines only, laid out on 5989.4 × 2796 mm (235.80 × 110.08 in), with the sheet marked for 4 mm material.

Author
DXF World · 530 files
Formats
SVG, DXF
Size
5,989 × 2,796 mm (235.80 × 110.08 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
68.25 m
Est. time, 10 W diode (3 mm)
227 min 30 s
Est. time, 40 W CO2 (3 mm)
94 min 48 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Nest the ribs, leg frames and box walls on your steel sheets and remove the thickness label.
  2. 02Cut one rib and one leg frame first and check that the slits slide together.
  3. 03Lock the ribs onto the leg frames from chest to tail, add the head, antlers, lower legs and tail.
  4. 04Assemble the fire box, drop it onto the back, then paint with heat-resistant paint.

How the deer is built

The body is not a flat silhouette: a row of curved ribs gives the chest, neck and head their volume, and each rib has slits that lock onto the two leg frames running along the body. The antlers and ears form one piece that fits over the head ribs, and the lower legs and a small tail slot in separately. On the right of the layout are the parts of the fire box: two end walls with handle cut-outs, two long walls with rows of air holes, a plain base and a toothed piece for the grate. The photo shows it finished in matte black steel in a stone-floored living room.

Material and machine

A small label on the sheet gives 4 mm, and the box walls have slots of about 5 mm, which leaves a little play for 4 mm steel. Measure the slits on the ribs in your CAM software before you nest. This is a plasma or fibre laser job for a grill: only steel belongs around hot charcoal. Delete the thickness label before cutting. The parts are spread over almost six metres of layout, so nest them tightly onto standard sheets.

Use and finishing

As a working grill, finish it with high-temperature stove paint and keep it outdoors on a stone or gravel base. Cut in plywood, the same file makes a striking indoor deer with the box used as a planter or a log holder, which is how many buyers would show it in a cabin or a hunting lodge. Metal workshops can offer it as a show piece for garden centres and restaurants with a terrace.

Questions about this file

What thickness is it drawn for?

The layout carries a 4 mm mark and its box slots measure about 5 mm. Check the slits in your software and cut a test pair before the full run.

Can I use it as a real barbecue?

Only when cut from steel. Plywood or MDF versions are for decoration, with the box as a planter or storage tray.

Can I make a smaller deer for a shelf?

Yes, but every slit shrinks with the scale. Scale it until the slits match the sheet you want to use, and test one joint.

Which paint survives the heat?

Use a high-temperature stove or grill paint on the fire box and the back ribs; normal enamel will blister.

Why is the layout so wide?

The parts are spread out with lots of space between them. Rearrange them onto your own sheets before cutting.

Similar files