DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Walnut-stained wooden tricycle with a large scroll front wheel, two small rear wheels and a round scroll basket, standing on a sideboardVisualization
DW-300002 · UPDATED 11/20/2026

Tricycle Planter SVG, 3D Bicycle Puzzle Laser Cut File, Vintage Bike Plant Holder DXF, Scroll Wheel Tricycle Model

A slot-together vintage tricycle with one large front wheel, two small rear wheels and a round basket between them, decorated with S-shaped scrolls. The free download has one SVG and one DXF with 22 parts laid out in 298.6 × 260.7 mm (11.76 × 10.26 in), and the slots are drawn for 3 mm plywood or MDF.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
299 × 261 mm (11.76 × 10.26 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
10.24 m
Est. time, 10 W diode (3 mm)
34 min 07 s
Est. time, 40 W CO2 (3 mm)
14 min 13 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Measure your sheet; the slots fit 3 mm material, so cut one wheel and the slotted rail first and test the joint.
  2. 02Cut the full layout and pick the two small pegs out of the front wheel and the half-round part out of the frame loop.
  3. 03Join the frame, rails and wheels, then stand the scrolls in the basket base and press the rim ring on top.
  4. 04Glue any loose joints, stain or paint the tricycle, and set a small pot or dried flowers in the basket.

What is in the layout

All 22 parts fit one sheet. The biggest is the front wheel, filled with scroll spokes around a hub, with a separate curved fender that follows its rim. Beside it are two smaller rear wheels with four curled spokes each. The frame has a long loop and a straight neck for the handlebar post; a half-round part is nested inside that loop, and two small T-shaped pegs sit inside the front wheel, so collect them before you clear the bed. The rest are two twisted rope-style rails, a slotted cross rail, a round seat disc, a horseshoe handlebar, the basket base, the basket rim ring and a set of S-shaped scrolls that stand between them as the basket wall.

Material and fit

The slots are drawn for 3 mm sheet. Measure your plywood first, since sheets sold as 3 mm are often a few tenths thinner or thicker, and loose slots make the basket wobble. Cut one wheel and the slotted rail as a test and push them together before running the whole layout. Do not scale the file to change the size unless you also change the material: the slot width grows and shrinks with everything else.

Assembly and use

Start with the frame and rails, add the wheels, then build the basket: set the scrolls into the base slots and press the rim ring over their tops. A drop of wood glue in each joint makes it sturdy enough to carry a small potted succulent or a jar of dried flowers. The photo shows it stained walnut brown, which also hides the dark laser edges. It makes a windowsill herb planter, a centerpiece for a vintage-themed wedding table or a gift for a cyclist.

Questions about this file

What material thickness do the slots fit?

3 mm plywood or MDF. If your sheet is thicker or thinner, adjust the slot widths in your software rather than scaling the whole file.

Can I make a bigger tricycle?

Yes, but the slots grow with the file. Doubling the size needs 6 mm material and a laser bed twice as large in each direction.

Will it hold a real plant?

A small potted succulent or an air plant, yes. Keep the pot in a plastic liner so water never reaches the wood.

Do I need glue?

The parts hold by friction when the slots match your sheet. Glue makes the model rigid enough to move around with a pot inside.

Can I cut it from acrylic?

Yes, 3 mm cast acrylic works, but the long twisted rails are more brittle than plywood, so press those joints gently.

Similar files