DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Black round medallion with six pointed petals, a spoked hub and six stars hung on a cream wall beside a windowVisualization
DW-300007 · UPDATED 11/20/2026

Round Medallion SVG, Six Petal Flower Wall Art DXF, Star Circle Wall Decor Laser File, Geometric Wall Hanging

A round geometric medallion with six pointed petals crossing a central hub, eight wedge-shaped windows in the hub and six small stars between the petals. Both free files, SVG and DXF, hold only cut lines at 182.9 × 182.9 mm (7.2 × 7.2 in) and scale to any size. The stars cut out as six separate pieces, so they are glued to a backing board or straight onto the wall.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
183 × 183 mm (7.20 × 7.20 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
3.65 m
Est. time, 10 W diode (3 mm)
12 min 09 s
Est. time, 40 W CO2 (3 mm)
5 min 04 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Scale the medallion to your wall and check that the narrowest petal band stays a few millimetres wide.
  2. 02Cut the hub windows and petal openings first, then the outer circle and the six stars.
  3. 03Sand or wipe the edges and paint the ring and the stars, in one colour or two.
  4. 04Fix the ring to the wall or a backing disc, then glue each star into its gap between the petals.

Placing the stars

The main piece is one outer ring that holds six narrow pointed petals and the round hub. The six stars sit in the open spaces between the petals and are not joined to anything, so they come out as loose parts. On a painted wall, hold the ring in place, mark where each star goes and fix them with small dots of mounting putty or glue. For a piece you can move, glue the ring and stars to a round backing board in a contrast colour. The photo shows the set in black on a pale wall.

Size and strength

At the file's 182.9 mm the petal outlines are thin, so cut it from 3 mm plywood or acrylic and handle it gently. Most people will scale it to 400–800 mm for a wall, where the petals become sturdy bands. Shrink it below the original size and the petals and the spokes between the hub windows get weak and may snap. Large versions also suit a CNC router in MDF or a plasma cutter in steel.

Turning it into a clock

The hub is solid in the very centre, so it is easy to drill a hole for a quartz clock movement. The six petal tips and the six stars sit close to the twelve hour positions, which gives you hour markers without adding numbers. Pick hands in a contrast colour so they read against the spokes.

Questions about this file

Why are the stars separate?

They float in the open spaces between the petals with nothing tying them to the ring. That lets you paint them another colour or set them on a backer.

Can I use it as a clock?

Yes. Drill a hole in the solid centre of the hub for a quartz movement; the petal tips and stars sit near the twelve hour positions.

What size should I cut it?

The file is 182.9 mm across. For a wall piece, 400 mm and up gives much sturdier petals.

Can it be cut from steel?

At a large size, yes, on a plasma or fibre cutter. Keep small versions for plywood or acrylic on a laser.

Does it need a backing board?

Only if you want the stars fixed in place as one piece. Without a backer, glue the stars straight onto the wall.

Similar files