VisualizationRound Geometric Wall Art SVG, Triangle Lattice Medallion Laser File, Circle Panel DXF, Scroll Disc
Two identical round medallions, each a thick outer ring filled with angular triangle and quad openings that swirl around a small central disc of scrollwork. The free download is one SVG and one DXF file with both copies stacked on 137.3 × 278.7 mm (5.41 × 10.97 in), cut lines only, so you get a matching pair or can delete one and scale the other up to wall size.
- Formats
- SVG, DXF
- Size
- 137 × 279 mm (5.41 × 10.97 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 8.71 m
- Est. time, 10 W diode (3 mm)
- 29 min 03 s
- Est. time, 40 W CO2 (3 mm)
- 12 min 06 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Keep both copies for a pair, or delete one and scale the other to your wall size.
- 02Cut the central scroll and small triangles first and the outer circle last.
- 03Push out the offcuts gently from the back so the thin scroll bridges do not break.
- 04Sand or wipe the faces, paint, and hang with one screw through the top of the ring.
The design
The outer ring holds a lattice of straight bars that cross at odd angles, leaving dozens of triangles and four-sided openings, a bit like cracked glass. The bars all lean the same way, so the pattern seems to turn around the centre. In the middle sits a smaller ring with a lacy scroll motif inside. The file holds two identical copies, one above the other.
Sizes and scaling
As drawn, each medallion is about 137 mm across: a good size for coasters on a shelf, window hangers, box lid inserts or a pair of matching ornaments. For a statement wall piece like the black one in the photo, delete one copy and scale the other to 500–800 mm. The lattice bars hold up well at large sizes, but the central scroll is the delicate part: at the drawn size its tendrils are thin, so cut that area in 3 mm plywood or acrylic with a clean, focused beam, and avoid shrinking the file any further. On a plasma table, scale it up to at least 600 mm so the scroll survives.
Hanging and finishing
A single small screw through the top of the outer ring is enough for a light panel, as in the photo. Paint it matte black against a pale wall, or gold on a dark wall, so the triangle openings show up clearly. Two medallions make a symmetrical pair on either side of a mirror or bed.
Questions about this file
Why are there two circles in the file?
The layout holds two identical medallions, so you can cut a matching pair in one job. Delete one if you need only a single piece.
How big is each medallion?
About 137 mm across as drawn. Scale up freely for wall art.
Which part is most fragile?
The scroll motif in the central disc. Keep the file at least at its drawn size and use a well-focused laser.
Can I use it as a coaster?
Only with a solid backing disc glued underneath, since the lattice is open. Seal the wood against drinks.
Does it work in steel?
Yes, at large sizes. Scale it to 600 mm or more so the central scroll is wider than the plasma kerf.
Similar files



