VisualizationChainsaw SVG, Lumberjack Party Cutout DXF, Wooden Toy Chainsaw Laser Cut File, Arborist Gift Tag Shape
A small side-view chainsaw silhouette: a motor body with an open rear grip, a top handle opening, a thin curved brake lever and a long rounded guide bar. The free SVG and DXF contain cut lines only for one piece of 142 × 43.4 mm (5.59 × 1.71 in), and the shape scales up well for bigger toys and party props.
- Formats
- SVG, DXF
- Size
- 142 × 43 mm (5.59 × 1.71 in)
- Material
- Plywood, MDF, acrylic or metal (scale to your piece)
- Cut length
- 0.44 m
- Est. time, 10 W diode (3 mm)
- 1 min 29 s
- Est. time, 40 W CO2 (3 mm)
- 37 s
- Layers
- CUT only, no engraving
Free account required to download
How to make it
- 01Scale the file to the job: keep 142 mm for toppers and tags, or enlarge it for a toy.
- 02Cut the two handle openings first and then the outline, and check that the slim lever came out whole.
- 03For a toy, cut two or three copies and glue them into a thick stack, clamping until dry.
- 04Paint the body orange and the bar grey, then add a magnet, a skewer or a ribbon.
The shape
The outline shows the saw from the side with the bar pointing right. The rear grip is an open loop with a small trigger notch inside it, a second opening forms the top handle, and a slim curved lever rises behind that handle. The lever is the weakest spot, only about 2 mm wide at the file size, so it is the first part to snap if you shrink the design. The guide bar is a plain rounded strip with room for engraving.
Size, material and stacking
At 142 mm long the cutout suits a cupcake or cake topper on a wooden skewer, a fridge magnet or a gift tag tied to a present for a tree surgeon. Doubled in size it becomes a pretend-play saw for kids who copy a parent in the garden. Glue two or three layers of 6 mm plywood into a stack for a chunky toy with a comfortable grip, close to the solid black piece in the photo. Painted orange with a grey bar, it reads as a saw from across the room.
Party and gift ideas
- Lumberjack or flannel-themed birthday: cupcake picks, banner shapes, table scatter.
- Place cards for a forestry crew dinner, with names engraved on the bar.
- A small plaque for a firewood shed or a workshop door.
- A thank-you tag for the arborist who took down the old tree.
Questions about this file
Is the slim lever strong enough?
At file size it is about 2 mm wide, fine for display in plywood or acrylic. For a toy that children will handle, scale the file up so the lever gets thicker.
How do I turn it into a cake topper?
Glue a wooden skewer to the back of the bar, or draw a short stick below the body in your software before cutting.
Can I engrave text on it?
Yes, the guide bar is a plain strip where a name, a date or a short phrase fits.
Which colours make it look like a real saw?
An orange or yellow body with a dark grey bar and black handles gives the familiar look.
Is it safe as a toy for small children?
Round over all edges with sandpaper, use non-toxic paint and stack layers so it does not snap. Leave magnets off any version meant for toddlers.
Similar files



