DXF / SVG / GeneratorsFiles. Tools. Possibilities.
EN
Saved0
Thick birch plywood panel with thirteen heart cut-outs down the left side leaning against a wallVisualization
DW-300024 · UPDATED 11/20/2026

Heart Card SVG, Valentine Card Front DXF, Laser Cut Wedding Card, Love Card Cover Cut File

A rectangular card front with thirteen heart-shaped windows in large and small sizes, scattered down the left side, leaving the right side plain for a message. It is a free SVG and DXF pair with cut lines only, 98.4 × 130.2 mm (3.87 × 5.13 in). Cut it from card, thin plywood or acrylic and set coloured paper behind the hearts.

Author
DXF World · 415 files
Formats
SVG, DXF
Size
98 × 130 mm (3.87 × 5.13 in)
Material
Plywood, MDF, acrylic or metal (scale to your piece)
Cut length
0.82 m
Est. time, 10 W diode (3 mm)
2 min 44 s
Est. time, 40 W CO2 (3 mm)
1 min 08 s
Layers
CUT only, no engraving

Free account required to download

How to make it

  1. 01Pick the material: card stock, thin veneer, or 2–3 mm plywood for a plaque.
  2. 02Tape the sheet flat and cut the thirteen hearts first, then the outer rectangle.
  3. 03Engrave or hand-write a message on the plain right side.
  4. 04Glue coloured paper or a photo behind the hearts and fix the panel to a folded card.

Building the card

The panel goes on the front of a folded card about 98 × 130 mm when closed. Glue a sheet of red, pink or gold paper to the inside of the cover so it shows through the thirteen hearts, then fold the card base from heavier stock. A thin wooden front in 1–1.5 mm plywood or veneer turns it into a keepsake card; fix it to the paper card with a few dots of tacky glue.

Cutting tips

Card stock and thin veneer burn easily, so use low power, high speed and air assist, and tape the sheet flat. Cut the hearts first and the outline last so the panel does not shift. The panel also scales up to a wall plaque or a gift box lid; the photo shows a thick plywood board in that style. When you scale it down, the gaps between neighbouring hearts get narrow and fragile.

Ideas for using it

Engrave a name, a date or a short line in the empty right half. Make a run of them for wedding invitations or Valentine's Day, or slip a photo behind the hearts for an anniversary. The same panel works as the lid of a small keepsake box, and a pack of five plain fronts in birch makes a tidy item for a craft fair table.

Questions about this file

What size card does it fit?

The panel is 98.4 × 130.2 mm, a little smaller than an A6 card. Scale it to match your own card blanks.

Can I cut it from paper?

Yes, card stock cuts well at low power. Use air assist and watch for flare-ups.

How many hearts are there?

Thirteen, in large and small sizes, set in a loose column on the left side.

Can I make it bigger?

Yes. Scaled up, it becomes a wall plaque or a box lid, as in the photo.

What goes behind the hearts?

Red or metallic paper, vellum, a photo or a scrap of fabric all work.

Similar files